Inductive proximity sensors for alternating current (AC)
2-wire with connector


These are inductive proximity sensors and switches ends with connector M12 which are used in industrial systems, as automation equipment for switching at 2-wire electrical circuits of alternating current. They are activated by approaching of metallic objects to their active area. The inductive proximity sensors and switches are resistant to moisture and dust. They have a longer period of work due to contactless switching of the electrical circuits.

Proximity sensor M1-12.71.C   with connector, Sn=3.0mm, 2-wire, NO, 90-240VAC, 10-300mA, M12x60mm

Inductive proximity sensor M12, switch M1-12.71.C

Shielded type proximity sensor M12 for alternating current with metallic housing M12x60mm, with normally open contact. The maximum distance of operation of the proximity sensor is 3,0mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's output has no protection of short circuit. AC sensor designated with the letter (a) have an operating voltage 20-50VAC, with letter (b) it is 40-110VAC. Example: M1-12.71.C(a) or M1-12.71.C(b)

See more...

Proximity sensor M1-12.72.C   with connector, Sn=3.0mm, 2-wire, NC, 90-240VAC, 10-300mA, M12x60mm

Inductive proximity sensor M12, switch M1-12.72.C

Shielded type proximity sensor M12 for alternating current with metallic housing M12x60mm, with normally closed contact. The maximum distance of operation of the proximity sensor is 3,0mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's output has no protection of short circuit. AC sensor designated with the letter (a) have an operating voltage 20-50VAC, with letter (b) it is 40-110VAC. Example: M1-12.71.C(a) or M1-12.71.C(b)

See more...

Proximity sensor M1-18.71.C   with connector, Sn=5.0mm, 2-wire, NO, 90-240VAC, 10-300mA, M18x61mm

Inductive proximity sensor M18, switch M1-18.71.C

Shielded type proximity sensor M18 for alternating current with metallic housing M18x61mm, with normally open contact. The maximum distance of operation of the proximity sensor is 5,0mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's output has no protection of short circuit. AC sensor designated with the letter (a) have an operating voltage 20-50VAC, with letter (b) it is 40-110VAC. Example: M1-18.71.C(a) or M1-18.71.C(b)

See more...

Proximity sensor M1-18.72.C   with connector, Sn=5.0mm, 2-wire, NC, 90-240VAC, 10-300mA, M18x61mm

Inductive proximity sensor M18, switch M1-18.72.C

Shielded type proximity sensor M18 for alternating current with metallic housing M18x61mm, with normally closed contact. The maximum distance of operation of the proximity sensor is 5,0mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's output has no protection of short circuit. AC sensor designated with the letter (a) have an operating voltage 20-50VAC, with letter (b) it is 40-110VAC. Example: M1-18.71.C(a) or M1-18.71.C(b)

See more...

Proximity sensor P1-18.71.C   with connector, Sn=8.0mm, 2-wire, NO, 90-240VAC, 10-300mA, M18x61mm

Inductive proximity sensor M18, switch P1-18.71.C

Unshielded type proximity sensor M18 for alternating current with plastic housing M18x61mm, with normally open contact. The maximum distance of operation of the proximity sensor is 8,0mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's output has no protection of short circuit. AC sensor designated with the letter (a) have an operating voltage 20-50VAC, with letter (b) it is 40-110VAC. Example: P1-18.71.C(a) or P1-18.71.C(b)

See more...

Proximity sensor P1-18.72.C   with connector, Sn=8.0mm, 2-wire, NC, 90-240VAC, 10-300mA, M18x61mm

Inductive proximity sensor M18, switch P1-18.72.C

Unshielded type proximity sensor M18 for alternating current with plastic housing M18x61mm, with normally closed contact. The maximum distance of operation of the proximity sensor is 8,0mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's output has no protection of short circuit. AC sensor designated with the letter (a) have an operating voltage 20-50VAC, with letter (b) it is 40-110VAC. Example: P1-18.71.C(a) or P1-18.71.C(b)

See more...

Proximity sensor M1-30.71.C   with connector, Sn=9.5mm, 2-wire, NO, 90-240VAC, 10-300mA, M30x64mm

Inductive proximity sensor M30, switch M1-30.71.C

Shielded type proximity sensor M30 for alternating current with metallic housing M30x64mm, with normally open contact. The maximum distance of operation of the proximity sensor is 9,5mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's output has no protection of short circuit. AC sensor designated with the letter (a) have an operating voltage 20-50VAC, with letter (b) it is 40-110VAC. Example: M1-30.71.C(a) or M1-30.71.C(b)

See more...

Proximity sensor M1-30.72.C   with connector, Sn=9.5mm, 2-wire, NC, 90-240VAC, 10-300mA, M30x64mm

Inductive proximity sensor M30, switch M1-30.72.C

Shielded type proximity sensor M30 for alternating current with metallic housing M30x64mm, with normally closed contact. The maximum distance of operation of the proximity sensor is 9,5mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's output has no protection of short circuit. AC sensor designated with the letter (a) have an operating voltage 20-50VAC, with letter (b) it is 40-110VAC. Example: M1-30.71.C(a) or M1-30.71.C(b)

See more...

Proximity sensor P1-30.71.C   with connector, Sn=14mm, 2-wire, NO, 90-240VAC, 10-300mA, M30x64mm

Inductive proximity sensor M30, switch P1-30.71.C

Unshielded type proximity sensor M30 for alternating current with plastic housing M30x64mm, with normally open contact. The maximum distance of operation of the proximity sensor is 14mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's output has no protection of short circuit. AC sensor designated with the letter (a) have an operating voltage 20-50VAC, with letter (b) it is 40-110VAC. Example: P1-30.71.C(a) or P1-30.71.C(b)

See more...

Proximity sensor P1-30.72.C   with connector, Sn=14mm, 2-wire, NC, 90-240VAC, 10-300mA, M30x64mm

Inductive proximity sensor M30, switch P1-30.72.C

Unshielded type proximity sensor M30 for alternating current with plastic housing M30x64mm, with normally closed contact. The maximum distance of operation of the proximity sensor is 14mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's output has no protection of short circuit. AC sensor designated with the letter (a) have an operating voltage 20-50VAC, with letter (b) it is 40-110VAC. Example: P1-30.71.C(a) or P1-30.71.C(b)

See more...

Proximity sensor P3-60.71.C   with connector, Sn=12,5mm, 2-wire, NO, 90-240VAC, 10-300mA, 71x30x15mm

Inductive proximity sensor, switch P3-60.71.C

Unshielded type parallelepipedal proximity sensor for alternating current with plastic housing 71x30x15mm, with normally open contact. The maximum distance of operation of the proximity sensor is 12,5mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's output has no protection of short circuit. AC sensor designated with the letter (a) have an operating voltage 20-50VAC, with letter (b) it is 40-110VAC. Example: P3-60.71.C(a) or P3-60.71.C(b)

See more...

Proximity sensor P3-60.72.C   with connector, Sn=12,5mm, 2-wire, NC, 90-240VAC, 10-300mA, 71x30x15mm

Inductive proximity sensor, switch P3-60.72.C

Unshielded type parallelepipedal proximity sensor for alternating current with plastic housing 71x30x15mm, with normally closed contact. The maximum distance of operation of the proximity sensor is 12,5mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's output has no protection of short circuit. AC sensor designated with the letter (a) have an operating voltage 20-50VAC, with letter (b) it is 40-110VAC. Example: P3-60.71.C(a) or P3-60.71.C(b)

See more...

Copyright ©  www.esa-control.com