Inductive proximity sensors and switches for speed control
3-wire for direct current (DC)


These are inductive proximity sensors and switches for direct current which are used for monitoring the minimum revolutions of the shafts and the minimum allowable speed of conveyer belts, elevators and other automated systems. The sensors detect the passage speed of metal objects to their active area. When reaching a higher than the set speed the output of the sensor is switched, and at a lower than the set speed the output is off. The inductive proximity sensors and switches for speed control are resistant to moisture and dust. They have a longer period of work due to contactless switching of the electrical circuits.

Proximity sensor ISM1-18.11.K   Sn=5.0mm, 3-wire PNP/NO, 10-30VDC, 250mA, M18x59mm

Inductive proximity sensor M18, switch ISM1-18.11.K

Shielded type proximity sensor for speed control M18 for direct current with metallic housing M18x59mm, with output type PNP, with one normally open contact. The maximum distance of operation of the proximity sensor is 5,0mm. The sensor ends with a 3-wire PVC connecting cable with a length of 2m. The sensor has two LEDs, one showing the output state of the inductive sensor, and the other showing the length of the received impulses. The sensor's output is protected of overload and short circuit.

See more...

Proximity sensor ISP1-18.11.K   Sn=8.0mm, 3-wire PNP/NO, 10-30VDC, 250mA, M18x59mm

Inductive proximity sensor M18, switch ISP1-18.11.K

Unshielded type proximity sensor for speed control M18 for direct current with plastic housing M18x59mm, with output type PNP, with one normally open contact. The maximum distance of operation of the proximity sensor is 8,0mm. The sensor ends with a 3-wire PVC connecting cable with a length of 2m. The sensor has two LEDs, one showing the output state of the inductive sensor, and the other showing the length of the received impulses. The sensor's output is protected of overload and short circuit.

See more...

Proximity sensor ISM1-30.11.K   Sn=9.5mm, 3-wire PNP/NO, 10-30VDC, 250mA, M30x53mm

Inductive proximity sensor M30, switch ISM1-30.11.K

Shielded type proximity sensor for speed control M30 for direct current with metallic housing M30x53mm, with output type PNP, with one normally open contact. The maximum distance of operation of the proximity sensor is 9,5mm. The sensor ends with a 3-wire PVC connecting cable with a length of 2m. The sensor has two LEDs, one showing the output state of the inductive sensor, and the other showing the length of the received impulses. The sensor's output is protected of overload and short circuit.

See more...

Proximity sensor ISP1-30.11.K   Sn=14mm, 3-wire PNP/NO, 10-30VDC, 250mA, M30x53mm

Inductive proximity sensor M30, switch ISP1-30.11.K

Unshielded type proximity sensor for speed control M30 for direct current with plastic housing M30x53mm, with output type PNP, with one normally open contact. The maximum distance of operation of the proximity sensor is 14mm. The sensor ends with a 3-wire PVC connecting cable with a length of 2m. The sensor has two LEDs, one showing the output state of the inductive sensor, and the other showing the length of the received impulses. The sensor's output is protected of overload and short circuit.

See more...

Proximity sensor ISM1-40.11.K   Sn=14mm, 3-wire PNP/NO, 10-30VDC, 250mA, M40x55mm

Inductive proximity sensor M40, switch ISM1-40.11.K

Shielded type proximity sensor for speed control M40 for direct current with metallic housing M40x55mm, with output type PNP, with one normally open contact. The maximum distance of operation of the proximity sensor is 14mm. The sensor ends with a 3-wire PVC connecting cable with a length of 2m. The sensor has two LEDs, one showing the output state of the inductive sensor, and the other showing the length of the received impulses. The sensor's output is protected of overload and short circuit.

See more...

Proximity sensor ISP1-40.11.K   Sn=24mm, 3-wire PNP/NO, 10-30VDC, 250mA, M40x55mm

Inductive proximity sensor M40, switch ISP1-40.11.K

Unshielded type proximity sensor for speed control M40 for direct current with plastic housing M40x55mm, with output type PNP, with one normally open contact. The maximum distance of operation of the proximity sensor is 24mm. The sensor ends with a 3-wire PVC connecting cable with a length of 2m. The sensor has two LEDs, one showing the output state of the inductive sensor, and the other showing the length of the received impulses. The sensor's output is protected of overload and short circuit.

See more...

Proximity sensor ISP3-60.11.K   Sn=12,5mm, 3-wire PNP/NO, 10-30VDC, 250mA, 60x30x15mm

Inductive proximity sensor, switch ISP3-60.11.K

Unshielded type parallelepipedal proximity sensor for speed control for direct current with plastic housing 60x30x15mm, with output type PNP, with one normally open contact. The maximum distance of operation of the proximity sensor is 12,5mm. The sensor ends with a 3-wire PVC connecting cable with a length of 2m. The sensor has two LEDs, one showing the output state of the inductive sensor, and the other showing the length of the received impulses. The sensor's output is protected of overload and short circuit.

See more...

Copyright ©  www.esa-control.com