These are magnetic sensors and switches that are used, as electronic automation equipment
for switching at two-wire and three-wire electrical circuits. The sensors react to
a magnetic field. When approaching a magnet to their active area they switching
the electrical circuit in which included. They are used to determine the process of movement
of pneumatic cylinders. The magnetic sensors and switches are resistant to moisture and dust.
They have a longer period of work due to contactless switching of the electrical circuits.
Magnetic sensor MD-2 Sn=10mm, 2-wire NO, 8-110V AC/DC, 100mA, 30x6.4x5mm
MD-2
Magnetic sensor MD-2 for direct and alternating current with plastic housing 30x6.4x5mm,
with normally open contact type "reed-contact". The maximum distance of operation of the magnetic sensor
is 10mm (depends on the intensity of the magnetic field). The sensor ends with a 2-wire PVC connecting cable
with a length of 2m and has an LED indicator showing the output state of the magnetic sensor.
Magnetic sensor MP4-30.11 Sn=10mm, 3-wire PNP/NO, 8-30VDC, 100mA, 30x6.4x5mm
MP4-30
Magnetic sensor MP4-30.11 for direct current with plastic housing 30x6.4x5mm,
with output type PNP, with one normally open contact type "reed-contact". The maximum distance of operation
of the magnetic sensor is 10mm (depends on the intensity of the magnetic field). The sensor ends with a 3-wire
PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the magnetic sensor.
Magnetic sensor MP4-30.21 Sn=10mm, 3-wire NPN/NO, 8-30VDC, 100mA, 30x6.4x5mm
MP4-30
Magnetic sensor MP4-30.21 for direct current with plastic housing 30x6.4x5mm,
with output type NPN, with one normally open contact type "reed-contact". The maximum distance of operation
of the magnetic sensor is 10mm (depends on the intensity of the magnetic field). The sensor ends with a 3-wire
PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the magnetic sensor.
