Diffuse photoelectric and optoelectronic sensors and switches
for direct current (DC)


These are diffuse type infrared photoelectric and optoelectronic sensors and switches which are used in industrial systems, as electronic automation equipment for switching at 3- and 4-wire electrical circuits of direct current. The receiver and the transmitter are located in one housing. When passing a subject in front of the active area of the sensor his output switches. The diffuse type infrared photoelectric sensors have a longer period of work due to contactless switching of the electrical circuits in which are included.

Diffuse photoelectric sensor OD1-18.10.F   Sn=200mm, PNP/NO+NC, 10-30VDC, 250mA, M18x65mm

Diffuse photoelectric sensor M18, switch OD1-18.10.F

Diffuse type infrared photoelectric sensor M18 for direct current with cylindrical plastic housing M18x65mm, with output type PNP, with one normally open and one normally closed contact. The maximum distance of operation of the photoelectric sensor is 200mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit. Diffuse optical sensors designated with letter "T" at the and have trimmer for sensitivity adjustment (Example: OD1-18.10.FT).

See more...

Diffuse photoelectric sensor OD1-18.20.F   Sn=200mm, NPN/NO+NC, 10-30VDC, 250mA, M18x65mm

Diffuse photoelectric sensor M18, switch OD1-18.20.F

Diffuse type infrared photoelectric sensor M18 for direct current with cylindrical plastic housing M18x65mm, with output type NPN, with one normally open and one normally closed contact. The maximum distance of operation of the photoelectric sensor is 200mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit. Diffuse optical sensors designated with letter "T" at the and have trimmer for sensitivity adjustment (Example: OD1-18.20.FT).

See more...

Diffuse photoelectric sensor OD1-18.10.FF   Sn=100mm, PNP/NO+NC, 10-30VDC, 250mA, M18x65mm

Diffuse photoelectric sensor M18, switch OD1-18.10.FF

Diffuse type infrared photoelectric sensor M18 for direct current with a focused ray for detection of smaller objects. The sensor is with cylindrical plastic housing M18x65mm, with output type PNP, with one normally open and one normally closed contact. The maximum distance of operation of the photoelectric sensor is 100mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit. Diffuse optical sensors designated with letter "T" at the and have trimmer for sensitivity adjustment (Example: OD1-18.10.FFT).

See more...

Diffuse photoelectric sensor OD1-18.20.FF   Sn=100mm, NPN/NO+NC, 10-30VDC, 250mA, M18x65mm

Diffuse photoelectric sensor M18, switch OD1-18.20.FF

Diffuse type infrared photoelectric sensor M18 for direct current with a focused ray for detection of smaller objects. The sensor is with cylindrical plastic housing M18x65mm, with output type NPN, with one normally open and one normally closed contact. The maximum distance of operation of the photoelectric sensor is 100mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit. Diffuse optical sensors designated with letter "T" at the and have trimmer for sensitivity adjustment (Example: OD1-18.20.FFT).

See more...

Diffuse photoelectric sensor OD3-60.10.FA   Sn=200mm, PNP/NO+NC, 10-30VDC, 250mA, 60x36x15mm

Diffuse photoelectric sensor, switch OD3-60.10.FA

Diffuse type infrared photoelectric sensor for direct current with parallelepipedal plastic housing 60x36x15mm, with output type PNP, with one normally open and one normally closed contact. The maximum distance of operation of the photoelectric sensor is 200mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit. Diffuse optical sensors designated with letter "T" at the and have trimmer for sensitivity adjustment (Example: OD3-60.10.FAT).

See more...

Diffuse photoelectric sensor OD3-60.20.FA   Sn=200mm, NPN/NO+NC, 10-30VDC, 250mA, 60x36x15mm

Diffuse photoelectric sensor, switch OD3-60.20.FA

Diffuse type infrared photoelectric sensor for direct current with parallelepipedal plastic housing 60x36x15mm, with output type NPN, with one normally open and one normally closed contact. The maximum distance of operation of the photoelectric sensor is 200mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit. Diffuse optical sensors designated with letter "T" at the and have trimmer for sensitivity adjustment (Example: OD3-60.20.FAT).

See more...

Diffuse photoelectric sensor OD1-30.10.F   Sn=700mm, PNP/NO+NC, 10-30VDC, 250mA, M30x69mm

Diffuse photoelectric sensor M30, switch OD1-30.10.F

Diffuse type infrared photoelectric sensor M30 for direct current with cylindrical plastic housing M30x69mm, with output type PNP, with one normally open and one normally closed contact. The maximum distance of operation of the photoelectric sensor is 700mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit. Diffuse optical sensors designated with letter "T" at the and have trimmer for sensitivity adjustment (Example: OD1-30.10.FT).

See more...

Diffuse photoelectric sensor OD1-30.20.F   Sn=700mm, NPN/NO+NC, 10-30VDC, 250mA, M30x69mm

Diffuse photoelectric sensor M30, switch OD1-30.20.F

Diffuse type infrared photoelectric sensor M30 for direct current with cylindrical plastic housing M30x69mm, with output type NPN, with one normally open and one normally closed contact. The maximum distance of operation of the photoelectric sensor is 700mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit. Diffuse optical sensors designated with letter "T" at the and have trimmer for sensitivity adjustment (Example: OD1-30.20.FT).

See more...

Diffuse photoelectric sensor OD3-60.10.F   Sn=700mm, PNP/NO+NC, 10-30VDC, 250mA, 60x39x15mm

Diffuse photoelectric sensor, switch OD3-60.10.F

Diffuse type infrared photoelectric sensor for direct current with parallelepipedal plastic housing 60x39x15mm, with output type PNP, with one normally open and one normally closed contact. The maximum distance of operation of the photoelectric sensor is 700mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit. Diffuse optical sensors designated with letter "T" at the and have trimmer for sensitivity adjustment (Example: OD3-60.10.FT).

See more...

Diffuse photoelectric sensor OD3-60.20.F   Sn=700mm, NPN/NO+NC, 10-30VDC, 250mA, 60x39x15mm

Diffuse photoelectric sensor, switch OD3-60.20.F

Diffuse type infrared photoelectric sensor for direct current with parallelepipedal plastic housing 60x39x15mm, with output type NPN, with one normally open and one normally closed contact. The maximum distance of operation of the photoelectric sensor is 700mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit. Diffuse optical sensors designated with letter "T" at the and have trimmer for sensitivity adjustment (Example: OD3-60.20.FT).

See more...

Copyright ©  www.esa-control.com