Mark type photoelectric and optoelectronic sensors and switches
for direct current (DC)


These are mark type photoelectric and optoelectronic sensors and switches which are used in industrial systems, as electronic automation equipment for switching at 3- and 4-wire electrical circuits of direct current. The mark type optical sensors emit red, green or white light and serve for registration of mark streaks on the packaging or other materials. If there is a mark streak in front of the active area of the sensor its output switches. The mark type photoelectric sensors and switches have a longer period of work due to contactless switching of the electrical circuits in which are included.

Mark photoelectric sensor OM1-18.10.RT   Sn=15mm, PNP/NO+NC, 10-30VDC, 250mA, M18x65mm

Mark photoelectric sensor M18, switch OM1-18.10.RT

Mark type photoelectric sensor with red light M18 for direct current with cylindrical plastic housing M18x65mm, with output type PNP, with one normally open and one normally closed contact. The nominal distance of operation of the photoelectric sensor is 15mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit.

See more...

Mark photoelectric sensor OM1-18.20.RT   Sn=15mm, NPN/NO+NC, 10-30VDC, 250mA, M18x65mm

Mark photoelectric sensor M18, switch OM1-18.20.RT

Mark type photoelectric sensor with red light M18 for direct current with cylindrical plastic housing M18x65mm, with output type NPN, with one normally open and one normally closed contact. The nominal distance of operation of the photoelectric sensor is 15mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit.

See more...

Mark photoelectric sensor OM1-18.10.GT   Sn=15mm, PNP/NO+NC, 10-30VDC, 250mA, M18x65mm

Mark photoelectric sensor M18, switch OM1-18.10.GT

Mark type photoelectric sensor with green light M18 for direct current with cylindrical plastic housing M18x65mm, with output type PNP, with one normally open and one normally closed contact. The nominal distance of operation of the photoelectric sensor is 15mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit.

See more...

Mark photoelectric sensor OM1-18.20.GT   Sn=15mm, NPN/NO+NC, 10-30VDC, 250mA, M18x65mm

Mark photoelectric sensor M18, switch OM1-18.20.GT

Mark type photoelectric sensor with green light M18 for direct current with cylindrical plastic housing M18x65mm, with output type NPN, with one normally open and one normally closed contact. The nominal distance of operation of the photoelectric sensor is 15mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit.

See more...

Mark photoelectric sensor OM3-60.10.RT   Sn=15mm, PNP/NO+NC, 10-30VDC, 250mA, 60x36x15mm

Mark photoelectric sensor, switch OM3-60.10.RT

Mark type photoelectric sensor with red light for direct current with parallelepipedal plastic housing 60x36x15mm, with output type PNP, with one normally open and one normally closed contact. The nominal distance of operation of the photoelectric sensor is 15mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit.

See more...

Mark photoelectric sensor OM3-60.20.RT   Sn=15mm, NPN/NO+NC, 10-30VDC, 250mA, 60x36x15mm

Mark photoelectric sensor, switch OM3-60.20.RT

Mark type photoelectric sensor with red light for direct current with parallelepipedal plastic housing 60x36x15mm, with output type NPN, with one normally open and one normally closed contact. The nominal distance of operation of the photoelectric sensor is 15mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit.

See more...

Mark photoelectric sensor OM3-60.10.GT   Sn=15mm, PNP/NO+NC, 10-30VDC, 250mA, 60x36x15mm

Mark photoelectric sensor, switch OM3-60.10.GT

Mark type photoelectric sensor with green light for direct current with parallelepipedal plastic housing 60x36x15mm, with output type PNP, with one normally open and one normally closed contact. The nominal distance of operation of the photoelectric sensor is 15mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit.

See more...

Mark photoelectric sensor OM3-60.20.GT   Sn=15mm, NPN/NO+NC, 10-30VDC, 250mA, 60x36x15mm

Mark photoelectric sensor, switch OM3-60.20.GT

Mark type photoelectric sensor with green light for direct current with parallelepipedal plastic housing 60x36x15mm, with output type NPN, with one normally open and one normally closed contact. The nominal distance of operation of the photoelectric sensor is 15mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit.

See more...

Copyright ©  www.esa-control.com