Fork type photoelectric and optoelectronic sensors and switches
for direct current (DC)


These are fork type infrared photoelectric and optoelectronic sensors and switches which are used in industrial systems, as electronic automation equipment for switching at 3- and 4-wire electrical circuits of direct current. Between the transmitter and the receiver there is an air gap. When passing a nontransparent object in the air gap the sensor's output switches. The fork type infrared photoelectric sensors have a longer period of work due to contactless switching of the electrical circuits in which are included.

Fork photoelectric sensor OV1-18.10.F   Sn=4mm, PNP/NO+NC, 10-30VDC, 250mA, M18x60mm

Fork photoelectric sensor M18, switch OV1-18.10.F

Fork type infrared photoelectric sensor M18 for direct current with cylindrical plastic housing M18x60mm, with output type PNP, with one normally open and one normally closed contact. The width of the air gap of the optical sensor is 4mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit.

See more...

Fork photoelectric sensor OV1-18.20.F   Sn=4mm, NPN/NO+NC, 10-30VDC, 250mA, M18x60mm

Fork photoelectric sensor M18, switch OV1-18.20.F

Fork type infrared photoelectric sensor M18 for direct current with cylindrical plastic housing M18x60mm, with output type NPN, with one normally open and one normally closed contact. The width of the air gap of the optical sensor is 4mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit.

See more...

Fork photoelectric sensor OV3-75.10.F   Sn=30mm, PNP/NO+NC, 10-30VDC, 250mA, 75x18x52mm

Fork photoelectric sensor, switch OV3-75.10.F

Fork type infrared photoelectric sensor for direct current with metalic housing 75x18x52mm, with output type PNP, with one normally open and one normally closed contact. The width of the air gap of the optical sensor is 30mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit.

See more...

Fork photoelectric sensor OV3-75.20.F   Sn=30mm, NPN/NO+NC, 10-30VDC, 250mA, 75x18x52mm

Fork photoelectric sensor, switch OV3-75.20.F

Fork type infrared photoelectric sensor for direct current with metalic housing 75x18x52mm, with output type NPN, with one normally open and one normally closed contact. The width of the air gap of the optical sensor is 30mm. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the optical sensor. The sensor's outputs are protected of overload and short circuit.

See more...

Copyright ©  www.esa-control.com