Encoders series E50-02
/ Photoelectric incremental rotary encoders /


The encoders or the so-called photoelectric incremental rotary transducers are element of the electronic automation equipments, which serve for the conversion of angular displacements into electrical impulses. The encoders are used in electrical circuits for direct current. They have two or more outputs out of which appear signals with successively overlapping electrical impulses. Encoder-made impulses enter in the inputs of controllers, where are converted and visualized in physical values.

Encoder E50-02A-30   n=30,  NPN outputs /A,B,C/,  Us=5Vdc, 100mA, Ø50x45mm, axis/Ø6

Encoder E50-02A-30

The rotary encoder E50-02A-30 has three outputs A, B and C and is supplied with a 5Vdc voltage. The encoder produces overlapping series of 30 inpulses per revolution at the outputs A and B, and one impulse per revolution at output C. The encoder's outputs are NPN type and are connected with 5,6K resistor to the plus of the power cable. The encoder is made of aluminum housing with dimensions Ø50x45mm and has connecting axis with diameter 6mm. It ends with a shielded cable with connector "Canon 9" with length 1m.

See more...

Encoder E50-02A-60   n=60,  NPN outputs /A,B,C/,  Us=5Vdc, 100mA, Ø50x45mm, axis/Ø6

Encoder E50-02A-60

The rotary encoder E50-02A-60 has three outputs A, B and C and is supplied with a 5Vdc voltage. The encoder produces overlapping series of 60 impulses per revolution at the outputs A and B, and one impulse per revolution at output C. The encoder's outputs are NPN type and are connected with 5,6K resistor to the plus of the power cable. The encoder is made of aluminum housing with dimensions Ø50x45mm and has connecting axis with diameter 6mm. It ends with a shielded cable with connector "Canon 9" with length 1m.

See more...

Encoder E50-02A-90   n=90,  NPN outputs /A,B,C/,  Us=5Vdc, 100mA, Ø50x45mm, axis/Ø6

Encoder E50-02A-90

The rotary encoder E50-02A-90 has three outputs A, B and C and is supplied with a 5Vdc voltage. The encoder produces overlapping series of 90 inpulses per revolution at the outputs A and B, and one impulse per revolution at output C. The encoder's outputs are NPN type and are connected with 5,6K resistor to the plus of the power cable. The encoder is made of aluminum housing with dimensions Ø50x45mm and has connecting axis with diameter 6mm. It ends with a shielded cable with connector "Canon 9" with length 1m.

See more...

Encoder E50-02B-30   n=30,  NPN outputs /A,B,C/,  Us=8-30Vdc, 100mA, Ø50x45mm, axis/Ø6

Encoder E50-02B-30

The rotary encoder E50-02B-30 has three outputs A, B and C and is supplied with a 8-30Vdc voltage. The encoder produces overlapping series of 30 inpulses per revolution at the outputs A and B, and one impulse per revolution at output C. The encoder's outputs are NPN type and are connected with 5,6K resistor to the plus of the power cable. The encoder is made of aluminum housing with dimensions Ø50x45mm and has connecting axis with diameter 6mm. It ends with a shielded cable with connector "Canon 9" with length 1m.

See more...

Encoder E50-02B-60   n=60,  NPN outputs /A,B,C/,  Us=8-30Vdc, 100mA, Ø50x45mm, axis/Ø6

Encoder E50-02B-60

The rotary encoder E50-02B-60 has three outputs A, B and C and is supplied with a 8-30Vdc voltage. The encoder produces overlapping series of 60 inpulses per revolution at the outputs A and B, and one impulse per revolution at output C. The encoder's outputs are NPN type and are connected with 5,6K resistor to the plus of the power cable. The encoder is made of aluminum housing with dimensions Ø50x45mm and has connecting axis with diameter 6mm. It ends with a shielded cable with connector "Canon 9" with length 1m.

See more...

Encoder E50-02B-90   n=90,  NPN outputs /A,B,C/,  Us=8-30Vdc, 100mA, Ø50x45mm, axis/Ø6

Encoder E50-02B-90

The rotary encoder E50-02B-90 has three outputs A, B and C and is supplied with a 8-30Vdc voltage. The encoder produces overlapping series of 90 inpulses per revolution at the outputs A and B, and one impulse per revolution at output C. The encoder's outputs are NPN type and are connected with 5,6K resistor to the plus of the power cable. The encoder is made of aluminum housing with dimensions Ø50x45mm and has connecting axis with diameter 6mm. It ends with a shielded cable with connector "Canon 9" with length 1m.

See more...

Copyright ©  www.esa-control.com