Analogue and digital timers and time-relays

The analogue and digital timers and time-relays are electronic devices which are used as automation equipments of production processes. They serve for commutation of DC and AC electric circuits. Fixed intervals of time are set by means of timers and time-relays in order to perform various processes in the field of industrial automation.

Analogue timer TAS2-30S/220V   T=(0.5sec - 30sec),   Us=220Vac,   relay output (NO+NC) 4A/220V, 86x35x58mm

Analogue timer TAS2-30S/220V

The analogue timer TAS2-30S/220V is used for switch-off and on electrical circuits for a fixed time interval "T" in the range of 0.5-30 sec, set by means of a potentiometer. The timer is started by turning on the supply voltage. It can be started also by means to external switch (sensor). The time-relay can function in a cyclical mode (as multivibrator) by selecting an appropriate combination of the key switch. The timer can also be used as a device for speed control. The analogue time-relay is designed for DIN rail installation.
Option: T=(0-3sec); (0-6sec); (1-60sec); (0.05-3min); (0.2-10min)

See more...

Analogue timer TAS2-30S/24V   T=(0.5sec - 30sec),   Us=24V ac/dc,   relay output (NO+NC) 4A/220V, 86x35x58mm

Analogue timer TAS2-30S/24V

The analogue timer TAS2-30S/24V is used for switch-off and on electrical circuits for a fixed time interval "T" in the range of 0.5-30 sec, set by means of a potentiometer. The timer is started by turning on the supply voltage. It can be started also by means to external switch (sensor). The time-relay can function in a cyclical mode (as multivibrator) by selecting an appropriate combination of the key switch. The timer can also be used as a device for speed control. The analogue time-relay is designed for DIN rail installation.
Option: T=(0-3sec); (0-6sec); (1-60sec); (0.05-3min); (0.2-10min)

See more...

Analogue timer TAS2-30S/12V   T=(0.5sec - 30sec),   Us=12V ac/dc,   relay output (NO+NC) 4A/220V, 86x35x58mm

Analogue timer TAS2-30S/12V

The analogue timer TAS2-30S/12V is used for switch-off and on electrical circuits for a fixed time interval "T" in the range of 0.5-30 sec, set by means of a potentiometer. The timer is started by turning on the supply voltage. It can be started also by means to external switch (sensor). The time-relay can function in a cyclical mode (as multivibrator) by selecting an appropriate combination of the key switch. The timer can also be used as a device for speed control. The analogue time-relay is designed for DIN rail installation.
Option: T=(0-3sec); (0-6sec); (1-60sec); (0.05-3min); (0.2-10min)

See more...

Digital timer TDE4-2/220V   T=(0.1sec - 9999min),   Us=220Vac,   relay output (NO+NC) 4A/220V, 95x49x113mm

Digital timer TDE4-2/220V

The digital timer TDE4-2/220V is a microprocessor device which is used for switching off and on electrical circuits for a fixed time interval "T" in the range from 0.1sec to 9999min set programmatically. The timer can be started in three ways: a) by turning on the supply voltage; b) by pressing a button on the front panel of the timer; c) by using an external button or sensor connected to the timer. The time-relay has an energy-independent memory. The digital timer is designed for installation in a dashboard (panel montage).

See more...

Digital timer TDE4-2/24V   T=(0.1sec - 9999min),   Us=24V ac/dc,   relay output (NO+NC) 4A/220V, 95x49x113mm

Digital timer TDE4-2/24V

The digital timer TDE4-2/24V is a microprocessor device which is used for switching off and on electrical circuits for a fixed time interval "T" in the range from 0.1sec to 9999min set programmatically. The timer can be started in three ways: a) by turning on the supply voltage; b) by pressing a button on the front panel of the timer; c) by using an external button or sensor connected to the timer. The time-relay has an energy-independent memory. The digital timer is designed for installation in a dashboard (panel montage).

See more...

Digital timer TDE4-2/12V   T=(0.1sec - 9999min),   Us=12V ac/dc,   relay output (NO+NC) 4A/220V, 95x49x113mm

Digital timer TDE4-2/12V

The digital timer TDE4-2/12V is a microprocessor device which is used for switching off and on electrical circuits for a fixed time interval "T" in the range from 0.1sec to 9999min set programmatically. The timer can be started in three ways: a) by turning on the supply voltage; b) by pressing a button on the front panel of the timer; c) by using an external button or sensor connected to the timer. The time-relay has an energy-independent memory. The digital timer is designed for installation in a dashboard (panel montage).

See more...

Digital timer TDE4-2L/220V   T=(0.1sec - 9999min),   Us=220Vac,   relay output (NO+NC) 4A/220V, 86x70x58mm

Digital timer TDE4-2L/220V

The digital timer TDE4-2L/220V is a microprocessor device which is used for switching off and on electrical circuits for a fixed time interval "T" in the range from 0.1sec to 9999min set programmatically. The timer can be started in three ways: a) by turning on the supply voltage; b) by pressing a button on the front panel of the timer; c) by using an external button or sensor connected to the timer. The time-relay has an energy-independent memory. The digital timer is designed for DIN rail installation.

See more...

Digital timer TDE4-2L/24V   T=(0.1sec - 9999min),   Us=24V ac/dc,   relay output (NO+NC) 4A/220V, 86x70x58mm

Digital timer TDE4-2L/24V

The digital timer TDE4-2L/24V is a microprocessor device which is used for switching off and on electrical circuits for a fixed time interval "T" in the range from 0.1sec to 9999min set programmatically. The timer can be started in three ways: a) by turning on the supply voltage; b) by pressing a button on the front panel of the timer; c) by using an external button or sensor connected to the timer. The time-relay has an energy-independent memory. The digital timer is designed for DIN rail installation.

See more...

Digital timer TDE4-2L/12V   T=(0.1sec - 9999min),   Us=12V ac/dc,   relay output (NO+NC) 4A/220V, 86x70x58mm

Digital timer TDE4-2L/12V

The digital timer TDE4-2L/12V is a microprocessor device which is used for switching off and on electrical circuits for a fixed time interval "T" in the range from 0.1sec to 9999min set programmatically. The timer can be started in three ways: a) by turning on the supply voltage; b) by pressing a button on the front panel of the timer; c) by using an external button or sensor connected to the timer. The time-relay has an energy-independent memory. The digital timer is designed for DIN rail installation.

See more...

Digital tact timer TDT4-2/220V   T=(0.1sec - 9999min),  Us=220Vac,  relay output (NO+NC) 4A/220V, 95x49x113mm

Digital tact timer, cyclic timer TDT4-2/220V

The digital tact timer TDT4-2/220V (cyclic time-relay) is made on the base of a microprocessor. Three main parameters are set: "Ton" - the time of ON-state of the output relay; "Toff" - the time of OFF-state of the output relay; "C" - number of cycles. The cyclic timer can be started in three ways: a) by turning on the supply voltage; b) by pressing a button of the front panel of the counter; c) by using an external button or sensor connected to the timer. The time-relay has an energy-independent. Programmatically can be set other parameters defining the operation of the timer. The tact timer is designed for installation in a dashboard (panel montage).

See more...

Digital tact timer TDT4-2/24V   T=(0.1sec - 9999min),  Us=24V ac/dc,  relay output (NO+NC) 4A/220V, 95x49x113mm

Digital tact timer, cyclic timer TDT4-2/24V

The digital tact timer TDT4-2/24V (cyclic time-relay) is made on the base of a microprocessor. Three main parameters are set: "Ton" - the time of ON-state of the output relay; "Toff" - the time of OFF-state of the output relay; "C" - number of cycles. The cyclic timer can be started in three ways: a) by turning on the supply voltage; b) by pressing a button of the front panel of the counter; c) by using an external button or sensor connected to the timer. The time-relay has an energy-independent. Programmatically can be set other parameters defining the operation of the timer. The tact timer is designed for installation in a dashboard (panel montage).

See more...

Digital tact timer TDT4-2/12V   T=(0.1sec - 9999min),  Us=12V ac/dc,  relay output (NO+NC) 4A/220V, 95x49x113mm

Digital tact timer, cyclic timer TDT4-2/12V

The digital tact timer TDT4-2/12V (cyclic time-relay) is made on the base of a microprocessor. Three main parameters are set: "Ton" - the time of ON-state of the output relay; "Toff" - the time of OFF-state of the output relay; "C" - number of cycles. The cyclic timer can be started in three ways: a) by turning on the supply voltage; b) by pressing a button of the front panel of the counter; c) by using an external button or sensor connected to the timer. The time-relay has an energy-independent. Programmatically can be set other parameters defining the operation of the timer. The tact timer is designed for installation in a dashboard (panel montage).

See more...

Digital tact timer TDT4-2L/220V   T=(0.1sec - 9999min),  Us=220Vac, relay output (NO+NC) 4A/220V, 86x70x58mm

Digital tact timer, cyclic timer TDT4-2L/220V

The digital tact timer TDT4-2L/220V (cyclic time-relay) is made on the base of a microprocessor. Three main parameters are set: "Ton" - the time of ON-state of the output relay; "Toff" - the time of OFF-state of the output relay; "C" - number of cycles. The cyclic timer can be started in three ways: a) by turning on the supply voltage; b) by pressing a button of the front panel of the counter; c) by using an external button or sensor connected to the timer. The time-relay has an energy-independent. Programmatically can be set other parameters defining the operation of the timer. The tact timer is designed for DIN rail installation.

See more...

Digital tact timer TDT4-2L/24V   T=(0.1sec - 9999min),  Us=24V ac/dc, relay output (NO+NC) 4A/220V, 86x70x58mm

Digital tact timer, cyclic timer TDT4-2L/24V

The digital tact timer TDT4-2L/24V (cyclic time-relay) is made on the base of a microprocessor. Three main parameters are set: "Ton" - the time of ON-state of the output relay; "Toff" - the time of OFF-state of the output relay; "C" - number of cycles. The cyclic timer can be started in three ways: a) by turning on the supply voltage; b) by pressing a button of the front panel of the counter; c) by using an external button or sensor connected to the timer. The time-relay has an energy-independent. Programmatically can be set other parameters defining the operation of the timer. The tact timer is designed for DIN rail installation.

See more...

Digital tact timer TDT4-2L/12V   T=(0.1sec - 9999min),  Us=12V ac/dc, relay output (NO+NC) 4A/220V, 86x70x58mm

Digital tact timer, cyclic timer TDT4-2L/12V

The digital tact timer TDT4-2L/12V (cyclic time-relay) is made on the base of a microprocessor. Three main parameters are set: "Ton" - the time of ON-state of the output relay; "Toff" - the time of OFF-state of the output relay; "C" - number of cycles. The cyclic timer can be started in three ways: a) by turning on the supply voltage; b) by pressing a button of the front panel of the counter; c) by using an external button or sensor connected to the timer. The time-relay has an energy-independent. Programmatically can be set other parameters defining the operation of the timer. The tact timer is designed for DIN rail installation.

See more...

Timer-clock TWD6-2/220V   t=(0-24h),   P=(0-999sec),  Us=220Vac,  relay output (NO+NC) 4A/220V, 95x49x113mm

Digital timer-watch TWD6-2/220V

The digital timer-clock TWD6-2 is a microprocessor device to which in the frameworks of 24 hours can be set 10 time intervals from 0 to 999sec during which the output relay of the device is switched on. The start of each interval is set in a real time. The timer-clock has an energy-independent memory and it is necessary to be checked only once in a real time and date. The device is designed for installation in a dashboard (panel montage).
Option: RS connection with 4-digit display DD4-1 (420x165x80mm).

See more...

Copyright ©  www.esa-control.com