Digital revolution counters
/Tachometers/


The digital rev counters or so-called tachometers are electronic devices used as automation equipments of production processes. They serve for converting of the incoming electrical impulses in revolutions. The main function of the revolution counters is to visualize the measured revolutions on a digital display and when reaching a fixed limit value they switch off or on the electrical circuit to which are included.

Digital rev counter CMD6-1/220V,   W=(3 - 600000 rpm),   Us=220Vac,   95x49x113mm

Digital rev counter CMD6-1/220V

The digital revolution counter CMD6-1/220V is a microprocessor device with a 6-digit display and serves for measuring revolutions in the range from 3 to 600000 rpm. It receives a signal from sensors and switches type "NPN" connected to his input. The rev counter is designed for installation in a dashboard (panel montage).

See more...

Digital rev counter CMD6-1/24V,   W=(3 - 600000 rpm),   Us=12-24V ac/dc,   95x49x113mm

Digital rev counter CMD6-1/24V

The digital revolution counter CMD6-1/24V is a microprocessor device with a 6-digit display and serves for measuring revolutions in the range from 3 to 600000 rpm. It receives a signal from sensors and switches type "NPN" connected to his input. The rev counter is designed for installation in a dashboard (panel montage).

See more...

Digital rev counter CMD6-2/220V,   W=(3 - 600000 rpm),  Us=220Vac,  outputs 2x(NO+NC) 4A/220V, 95x49x113mm

Digital rev counter CMD6-2/220V

The digital revolution counter CMD6-2/220V is a microprocessor device with a 6-digit display and serves for measuring revolutions in the range from 3 to 600000 rpm. The rev counter has two output relays and there can be set two limit values "W1" and "W2" in reaching of which the relevant output relay switches on. The digital rev counter receives a signal from sensors and switches type "NPN" connected to his input. The tachometer is designed for installation in a dashboard (panel montage).

See more...

Digital rev counter CMD6-2/24V,   W=(3 - 600000 rpm),  Us=24V ac/dc,  outputs 2x(NO+NC) 4A/220V, 95x49x113mm

Digital rev counter CMD6-2/24V

The digital revolution counter CMD6-2/24V is a microprocessor device with a 6-digit display and serves for measuring revolutions in the range from 3 to 600000 rpm. The rev counter has two output relays and there can be set two limit values "W1" and "W2" in reaching of which the relevant output relay switches on. The digital rev counter receives a signal from sensors and switches type "NPN" connected to his input. The tachometer is designed for installation in a dashboard (panel montage).

See more...

Digital rev counter CMD6-2/12V,   W=(3 - 600000 rpm),  Us=12V ac/dc,  outputs 2x(NO+NC) 4A/220V, 95x49x113mm

Digital rev counter CMD6-2/12V

The digital revolution counter CMD6-2/12V is a microprocessor device with a 6-digit display and serves for measuring revolutions in the range from 3 to 600000 rpm. The rev counter has two output relays and there can be set two limit values "W1" and "W2" in reaching of which the relevant output relay switches on. The digital rev counter receives a signal from sensors and switches type "NPN" connected to his input. The tachometer is designed for installation in a dashboard (panel montage).

See more...

Digital rev counter CMD6-2W/220V,   W=(3 - 600000 rpm),  Us=220Vac,  outputs 2x(NO+NC) 4A/220V, 95x49x113mm

Digital rev counter CMD6-2W/220V

The digital revolution counter CMD6-2W/220V is a microprocessor device with a 6-digit display and serves for measuring revolutions in the range from 3 to 600000 rpm. The rev counter is used for controlling the revolutions of rotating objects in the range between two limit values "W1" and "W2". It has two output relays. The relay-1 switches on when the revolutions are lower than "W1" and the relay-2 switches on when the revolutions are higher than "W2". The rev counter can be used for controlling the minimum permitted revolutions of elevators and other rotating mechanisms. The digital rev counter receives a signal from sensors and switches type "NPN" connected to his input. The tachometer is designed for installation in a dashboard (panel montage).

See more...

Digital rev counter CMD6-2W/24V,   W=(3 - 600000 rpm),  Us=24V ac/dc,  outputs 2x(NO+NC) 4A/220V, 95x49x113mm

Digital rev counter CMD6-2W/24V

The digital revolution counter CMD6-2W/24V is a microprocessor device with a 6-digit display and serves for measuring revolutions in the range from 3 to 600000 rpm. The rev counter is used for controlling the revolutions of rotating objects in the range between two limit values "W1" and "W2". It has two output relays. The relay-1 switches on when the revolutions are lower than "W1" and the relay-2 switches on when the revolutions are higher than "W2". The rev counter can be used for controlling the minimum permitted revolutions of elevators and other rotating mechanisms. The digital rev counter receives a signal from sensors and switches type "NPN" connected to his input. The tachometer is designed for installation in a dashboard (panel montage).

See more...

Digital rev counter CMD6-2W/12V,   W=(3 - 600000 rpm),  Us=12V ac/dc,  outputs 2x(NO+NC) 4A/220V, 95x49x113mm

Digital rev counter CMD6-2W/12V

The digital revolution counter CMD6-2W/12V is a microprocessor device with a 6-digit display and serves for measuring revolutions in the range from 3 to 600000 rpm. The rev counter is used for controlling the revolutions of rotating objects in the range between two limit values "W1" and "W2". It has two output relays. The relay-1 switches on when the revolutions are lower than "W1" and the relay-2 switches on when the revolutions are higher than "W2". The rev counter can be used for controlling the minimum permitted revolutions of elevators and other rotating mechanisms. The digital rev counter receives a signal from sensors and switches type "NPN" connected to his input. The tachometer is designed for installation in a dashboard (panel montage).

See more...

Digital rev counter CMD6-3R/220V,   W=(3 - 600000 rpm),   Us=220Vac,   95x49x113mm

Digital rev counter CMD6-3R/220V

The digital revolution counter CMD6-3R/220V is a microprocessor device with a 6-digit display and serves for measuring revolutions in the range from 3 to 600000 rpm. The rev counter is reversible and has two inputs "A" and "B". It operates in combination with two sensors type "NPN" or one sensor type "NPN" with two dephased outputs (OV1-18.24.F). The revolution counter indicates the rotation direction of the shaft by means of two LEDs located on the front panel. The tachometer is designed for installation in a dashboard (panel montage).

See more...

Digital rev counter CMD6-3R/24V,   W=(3 - 600000 rpm),   Us=12-24V ac/dc,   95x49x113mm

Digital rev counter CMD6-3R/24V

The digital revolution counter CMD6-3R/24V is a microprocessor device with a 6-digit display and serves for measuring revolutions in the range from 3 to 600000 rpm. The rev counter is reversible and has two inputs "A" and "B". It operates in combination with two sensors type "NPN" or one sensor type "NPN" with two dephased outputs (OV1-18.24.F). The revolution counter indicates the rotation direction of the shaft by means of two LEDs located on the front panel. The tachometer is designed for installation in a dashboard (panel montage).

See more...

Digital rev counter CMD6-4/220V,   W=(3 - 600000 rpm),  Us=220Vac,  outputs 2x(NO+NC) 4A/220V, 95x49x113mm

Digital rev counter CMD6-4/220V

The digital revolution counter CMD6-4/220V is a microprocessor device with a 6-digit display and serves for measuring revolutions in the range from 3 to 600000 rpm. The rev counter has two output relays and there can be set two limit values "W1" and "W2" in reaching of which the relevant output relay switches on. It operates in combination with sensors type "NPN". If the coming into the rev counter impulses are received by using a sensor from gear located to shaft, there can be set a conversion coefficient "n" equal to the number of wheel-teeth in a way that the rev counter indicates the actual revolutions of the shaft. The tachometer is designed for installation in a dashboard (panel montage).

See more...

Digital rev counter CMD6-4/24V,   W=(3 - 600000 rpm),  Us=24V ac/dc,  outputs 2x(NO+NC) 4A/220V, 95x49x113mm

Digital rev counter CMD6-4/24V

The digital revolution counter CMD6-4/24V is a microprocessor device with a 6-digit display and serves for measuring revolutions in the range from 3 to 600000 rpm. The rev counter has two output relays and there can be set two limit values "W1" and "W2" in reaching of which the relevant output relay switches on. It operates in combination with sensors type "NPN". If the coming into the rev counter impulses are received by using a sensor from gear located to shaft, there can be set a conversion coefficient "n" equal to the number of wheel-teeth in a way that the rev counter indicates the actual revolutions of the shaft. The tachometer is designed for installation in a dashboard (panel montage).

See more...

Digital rev counter CMD6-4/12V,   W=(3 - 600000 rpm),  Us=12V ac/dc,  outputs 2x(NO+NC) 4A/220V, 95x49x113mm

Digital rev counter CMD6-4/12V

The digital revolution counter CMD6-4/12V is a microprocessor device with a 6-digit display and serves for measuring revolutions in the range from 3 to 600000 rpm. The rev counter has two output relays and there can be set two limit values "W1" and "W2" in reaching of which the relevant output relay switches on. It operates in combination with sensors type "NPN". If the coming into the rev counter impulses are received by using a sensor from gear located to shaft, there can be set a conversion coefficient "n" equal to the number of wheel-teeth in a way that the rev counter indicates the actual revolutions of the shaft. The tachometer is designed for installation in a dashboard (panel montage).

See more...

Copyright ©  www.esa-control.com