Square inductive proximity sensor P3-60.61.K

Sn=12.5mm, 2-wire, NO, 8-30VDC, 1-80mA, 60x30x15mm

Price 26.78 € no VAT

Unshielded type P3-60.61.K proximity inductive sensor for direct current with parallelepipedal plastic housing 60x30x15mm, with normally open contact. The maximum distance of operation of the proximity sensor is 12,5mm. The sensor ends with a 2-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the inductive sensor. The sensor's output is protected of overload and short circuit.

FEATURES

The P3-60 unshielded inductive proximity sensor is used in industrial systems, as automation equipment for switching at 2-wire direct current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.

TECHNICAL PARAMETERS

Nominal switching distance, Sn	12.5 mm ±4%
Measuring plate steel, St 37	30x30x1 mm
Hysteresis, h	5 ... 12%
Supply voltage, Us	8 … 30 Vdc (Ripple ±10%)
Residual voltage (max), Ures	3.6 V (I = 80 mA)
Load current, Iout	1 ... 80 mА
Current protection of the output (impulse), Iprot	125 mA (25°С)
Current consumption (max), Is	0.2 mA
Switching frequency (max), fo	100 Hz (Sn=6.5 mm)
Switching time, fall and rise, tf / tr	400 µs / 20 µs
Operating temperature range, Tamb	-25° … +70° C
Degree of protection	IP67 (IEC144)
Light output indicator	LED
Joining - cable “LIYY“	2x0.25 mm², L=2 m, PVC, grey
Overall dimensions	72x30x15 mm
Housing materia	PA6 (Polyamide)