Proximity inductive sensor P3-60.61.KC

Sn=12.5mm, 2-wire, NO, 8-30VDC, 1-80mA, 72x30x15mm

Price 33.6 EUR no VAT

Unshielded type P3-60.61.KC proximity inductive sensor for direct current with parallelepipedal plastic housing 72x30x15mm, with normally open contact. The maximum distance of operation of the proximity sensor is 12,5mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's output is protected of overload and short circuit.

FEATURES

The unshielded type M30 inductive proximity sensor with connector P3-60 is used in industrial systems, as automation equipment for switching at 2-wire direct current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.

TECHNICAL PARAMETERS

Operating distance, Sn 12,5 mm
Hysteresis, h 4-15%
Supply voltage, Us 8…30 Vdc (Ripple ±10%)
Residual voltage (max), Ures 3,6 V (I = 80 mA)
Load current, Iout 1 ... 80 mА
Protection of output (scanning), Iprot 125 mA (25°С)
Current consumption, Is 0,2 mA
Switching frequency (max), fo 100 Hz (Sn=6,5 mm)
Time of fall and rise, tf / tr 400 µs / 20 µs
Operating temperature range, Tamb -25°…+70° C
Degree of protection IP67 (IEC144)
Light output indicator LED
Joining M12 connector, 4-pins
Overall dimensions 72x30x15 mm
Housing - plastic PA6 (Polyamide)

Scheme of connection

OUTPUT CHARACTERISTIC

Overall dimensions (mm)

Overall dimensions of inductive sensor P3-60C, L=60

TYPE PARAMETERS OF 2-WIRE UNSHILDED INDUCTIVE SENSORS WITH CONNECTOR - P3-60, DC

TYPE OUTPUT FUNCTION
P3-60.61.KCNO
P3-60.62.KCNC