Square inductive proximity sensors with connector P3-60.10.KC
Sn=12.5mm, 4-wire, PNP/NO+NC, 10-30VDC, 250mA, 72x30x15mm
Unshielded type P3-60.10.KC proximity inductive sensor for direct current with parallelepipedal plastic housing 72x30x15mm, with PNP output type, with one normally open and one normally closed contact.. The maximum distance of operation of the proximity sensor is 12,5mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's outputs are protected of overload and short circuit.
FEATURES
The P3-60 unshielded inductive proximity sensor with connector is used in industrial systems, as automation equipment for switching at 3- and 4-wire direct current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.
TECHNICAL PARAMETERS
Nominal switching distance, Sn | 12.5 mm ±4% |
Measuring plate steel, St 37 | 30x30x1 mm |
Hysteresis, h | 5 ... 12% |
Supply voltage, Us | 10 … 30 Vdc (Ripple ±10%) |
Output voltage (max), Uout | 35 Vdc (open collector) |
Residual voltage (max), Ures | 0.8 V (I = 250 mA) |
Load current (max), Iout | 250 mА |
Current protection of the output (impulse), Iprot | 350 mA (25°С) |
Current consumption (max), Is | 9 mA |
Switching frequency (max), fo | 100 Hz (Sn=6.5 mm) |
Switching time, fall and rise, tf / tr | 0.6 µs / 0.2 µs |
Operating temperature range, Tamb | -25° … +70° C |
Degree of protection | IP67 (IEC144) |
Light output indicator | LED |
Joining | M12 connector, 4-pins |
Overall dimensions | 72x30x15 mm |
Housing material | PA6 (Polyamide) |
Overall dimensions (mm)
TYPE PARAMETERS OF 4-WIRE UNSHILDED INDUCTIVE SENSORS WITH CONNECTOR - P3-60, DC
TYPE | OUTPUT FUNCTION |
---|---|
P3-60.10.KC | PNP / NO+NC |
P3-60.20.KC | NPN / NO+NC |