Proximity inductive sensor P3-60.71.CU1

Sn=12.5mm, 2-wire, NO, 90-240VAC, 10-300mA, 72x30x15mm

Price 33.6 EUR no VAT

Unshielded type P3-60.71.CU1 proximity inductive sensor for alternating current with parallelepipedal plastic housing 72x30x15mm, with normally open contact. The maximum distance of operation of the proximity sensor is 12,5mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's output has no protection of short circuit. AC sensor designated with the symbol (U2) have an operating voltage 40-100VAC, with symbol (U3) it is 20-50VAC (by request).

FEATURES

The unshielded type M30 inductive proximity sensor with connector is used in industrial systems, as automation equipment for switching at 2-wire alternating current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.

TECHNICAL PARAMETERS

Operating distance, Sn 12,5 mm
Hysteresis, h 4-15%
Supply voltage, Us 90…240 Vac / 40...60 Hz (U1)
40…100 Vac / 40...60 Hz (U2)
20 … 50 Vac / 40...60 Hz (U3)
Residual voltage (max), Ures 4,4 V
Load current, Iout 10 ... 300 mА
Current consumption, Is 1,5 mA
Switching frequency (max), fo 20 Hz
Operating temperature range, Tamb -25°…+70° C
Degree of protection IP67 (IEC144)
Output element Thyristor
Output light indicator LED
Joining M12 connector, 4-pins
Overall dimensions 72x30x15 mm
Housing - plastic PA6 (Polyamide)

Scheme of connection

OUTPUT CHARACTERISTIC

Overall dimensions (mm)

Overall dimensions of inductive sensor P3-60, L=60

TYPE PARAMETERS OF 2-WIRE UNSHILDED INDUCTIVE SENSORS WITH CONNECTOR P3-60, AC

TYPE OPERATING VOLTAGE OUTPUT FUNCTION
P3-60.71.CU190…240 VACNO
P3-60.72.CU190…240 VACNC
P3-60.71.CU240…100 VACNO
P3-60.72.CU240…100 VACNC
P3-60.71.CU320…50 VACNO
P3-60.72.CU320…50 VACNC