Proximity inductive sensor P3-60.72.CU1
Sn=12.5mm, 2-wire, NC, 90-240VAC, 10-300mA, 72x30x15mm
Unshielded type P3-60.72.CU1 proximity inductive sensor for alternating current with parallelepipedal plastic housing 72x30x15mm, with normally closed contact. The maximum distance of operation of the proximity sensor is 12,5mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's output has no protection of short circuit. AC sensor designated with the symbol (U2) have an operating voltage 40-100VAC, with symbol (U3) it is 20-50VAC (by request).
FEATURES
The unshielded type P3-60 inductive proximity sensor with connector is used in industrial systems, as automation equipment for switching at 2-wire alternating current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.
TECHNICAL PARAMETERS
Operating distance, Sn | 12,5 mm |
Hysteresis, h | 4-15% |
Supply voltage, Us | 90…240 Vac / 40...60 Hz (U1) |
40…100 Vac / 40...60 Hz (U2) | |
20 … 50 Vac / 40...60 Hz (U3) | |
Residual voltage (max), Ures | 4,4 V |
Load current, Iout | 10 ... 300 mА |
Current consumption, Is | 1,5 mA |
Switching frequency (max), fo | 20 Hz |
Operating temperature range, Tamb | -25°…+70° C |
Degree of protection | IP67 (IEC144) |
Output element | Thyristor |
Output light indicator | LED |
Joining | M12 connector, 4-pins |
Overall dimensions | 72x30x15 mm |
Housing - plastic | PA6 (Polyamide) |
Overall dimensions (mm)

TYPE PARAMETERS OF 2-WIRE UNSHILDED INDUCTIVE SENSORS WITH CONNECTOR P3-60, AC
TYPE | OPERATING VOLTAGE | OUTPUT FUNCTION |
---|---|---|
P3-60.71.CU1 | 90…240 VAC | NO |
P3-60.72.CU1 | 90…240 VAC | NC |
P3-60.71.CU2 | 40…100 VAC | NO |
P3-60.72.CU2 | 40…100 VAC | NC |
P3-60.71.CU3 | 20…50 VAC | NO |
P3-60.72.CU3 | 20…50 VAC | NC |