M12 inductive proximity sensor with connector M1-12.20.KC

Sn=3.5mm, 4-wire NPN/NO+NC, 10-30VDC, 250mA, M12x60mm

Price 32.76 EUR no VAT

Shielded type M1-12.20.KC proximity inductive sensor for direct current with cylindrical metallic housing M12x60mm, with NPN output type, with one normally open and one normally closed contact. The maximum distance of operation of the proximity sensor is 3,5mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's outputs are protected of overload and short circuit.

FEATURES

The M12 shielded inductive proximity sensor with connector is used in industrial systems, as automation equipment for switching at 3- and 4-wire direct current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.

TECHNICAL PARAMETERS

Operating distance, Sn	3,5 mm
Hysteresis, h	4-15%
Supply voltage, Us	10…30 Vdc (Ripple ±10%)
Output voltage (max), Uout	35 Vdc (open collector)
Residual voltage (max), Ures	0,8 V (I = 250 mA)
Load current (max), Iout	250 mА
Protection of output (scanning), Iprot	350 mA (25°С)
Current consumption, Is	9 mA
Switching frequency (max), fo	1000 Hz (Sn=1,8 mm)
Time of fall and rise, tf / tr	0,2 µs / 0,6 µs
Operating temperature range, Tamb	-25°…+70° C
Degree of protection	IP67 (IEC144)
Light output indicator	LED
Joining	M12 connector, 4-pins
Overall dimensions	M12x1, L=60 mm
Housing - metallic	CuZn (Ni plated)