M12 inductive proximity sensor with connector M1-12.61.KC

Sn=3.3mm, 2-wire, NO, 8-30VDC, 1-80mA, M12x60mm

Price 33.08 EUR no VAT

Shielded type M1-12.61.KC proximity inductive sensor for direct current with cylindrical metallic housing M12x60mm, with normally open contact. The maximum distance of operation of the proximity sensor is 3,3mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's output is protected of overload and short circuit.

FEATURES

The shielded type M12 inductive proximity sensor with connector is used in industrial systems, as automation equipment for switching at 2-wire direct current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.

TECHNICAL PARAMETERS

Nominal switching distance, Sn 3.3 mm ±4%
Measuring plate steel, St 37 12x12x1 mm
Hysteresis, h 5 ... 12%
Supply voltage, Us 8 … 30 Vdc (Ripple ±10%)
Residual voltage (max), Ures 3.6 V (I = 80 mA)
Load current, Iout 1 ... 80 mА
Current protection of the output (impulse), Iprot 125 mA (25°С)
Current consumption (max), Is 0.2 mA
Switching frequency (max), fo 1000 Hz (Sn=1.6 mm)
Switching time, fall and rise, tf / tr 400 µs / 20 µs
Operating temperature range, Tamb -25° … +70° C
Degree of protection IP67 (IEC144)
Light output indicator LED
Joining M12 connector, 4-pins
Overall dimensions M12x1, L=60 mm
Housing materia CuZn (Ni plated)

Scheme of connection

OUTPUT CHARACTERISTIC

Dependence of the residual voltage (U res) on the output current (I out)

Overall dimensions (mm)

Overall dimensions of inductive sensor M12C, L=60

TYPE PARAMETERS OF 2-WIRE SHILDED INDUCTIVE SENSORS WITH CONNECTOR - M12, DC

TYPE OUTPUT FUNCTION
M1-12.61.KCNO
M1-12.62.KCNC