M12 inductive proximity sensor with connector M1-12.62.KC
Sn=3.3mm, 2-wire, NC, 8-30VDC, 1-80mA, M12x60mm
Shielded type M1-12.62.KC proximity inductive sensor for direct current with cylindrical metallic housing M12x60mm, with normally closed contact. The maximum distance of operation of the proximity sensor is 3,3mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's output is protected of overload and short circuit.
FEATURES
The shielded type M12 inductive proximity sensor with connector is used in industrial systems, as automation equipment for switching at 2-wire direct current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.
TECHNICAL PARAMETERS
| Nominal switching distance, Sn | 3.3 mm ±4% |
| Measuring plate steel, St 37 | 12x12x1 mm |
| Hysteresis, h | 5 ... 12% |
| Supply voltage, Us | 8 … 30 Vdc (Ripple ±10%) |
| Residual voltage (max), Ures | 3.6 V (I = 80 mA) |
| Load current, Iout | 1 ... 80 mА |
| Current protection of the output (impulse), Iprot | 125 mA (25°С) |
| Current consumption (max), Is | 0.2 mA |
| Switching frequency (max), fo | 1000 Hz (Sn=1.6 mm) |
| Switching time, fall and rise, tf / tr | 400 µs / 20 µs |
| Operating temperature range, Tamb | -25° … +70° C |
| Degree of protection | IP67 (IEC144) |
| Light output indicator | LED |
| Joining | M12 connector, 4-pins |
| Overall dimensions | M12x1, L=60 mm |
| Housing materia | CuZn (Ni plated) |
Scheme of connection
OUTPUT CHARACTERISTIC
Overall dimensions (mm)
TYPE PARAMETERS OF 2-WIRE SHILDED INDUCTIVE SENSORS WITH CONNECTOR - M12, DC
| TYPE | OUTPUT FUNCTION |
|---|---|
| M1-12.61.KC | NO |
| M1-12.62.KC | NC |
