M14 inductive proximity sensor M1-14.22.K

Sn=3.5mm, 3-wire, NPN/NC, 10-30VDC, 250mA, M14x47mm

Price 26.25 EUR no VAT

Shielded type M1-14.22.K proximity inductive sensor for direct current with cylindrical metallic housing M14x47mm, with NPN output type, with one normally closed contact. The maximum distance of operation of the proximity sensor is 3,5mm. The sensor ends with a 3-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the inductive sensor. The sensor's output are protected of overload and short circuit.

FEATURES

The presented shielded type M14 inductive proximity sensor is used in industrial systems, as automation equipment for switching at 3-wire direct current electrical circuits. It is activated by approaching of metallic object to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.

TECHNICAL PARAMETERS

Nominal switching distance, Sn	3.5 mm ±4%
Measuring plate steel, St 37	14x14x1 mm
Hysteresis, h	5 ... 12%
Supply voltage, Us	10 … 30 Vdc (Ripple ±10%)
Output voltage (max), Uout	35 Vdc (open collector)
Residual voltage (max), Ures	0.8 V (I = 250 mA)
Load current (max), Iout	250 mА
Current protection of the output (impulse), Iprot	350 mA (25°С)
Current consumption (max), Is	9 mA
Switching frequency (max), fo	800 Hz (Sn=1.8 mm)
Switching time, fall and rise, tf / tr	0.2 µs / 0.6 µs
Operating temperature range, Tamb	-25° … +70° C
Degree of protection	IP67 (IEC144)
Light output indicator	LED
Joining - cable “LIYY“	3x0.25 mm², L=2 m, PVC, grey
Overall dimensions	M14x1, L=47 mm
Housing material	CuZn (Ni plated)