M18 inductive proximity sensor with connector P1-18.20.KC

Sn=8.0mm, 4-wire NPN/NO+NC, 10-30VDC, 250mA, M18x60mm

Price 32.76 EUR no VAT

Unshielded type P1-18.20.KC proximity inductive sensor for direct current with cylindrical plastic housing M18x60mm, with NPN output type, with one normally open and one normally closed contact. The maximum distance of operation of the proximity sensor is 8,0mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's outputs are protected of overload and short circuit.

FEATURES

The M18 unshielded inductive proximity sensor with connector is used in industrial systems, as automation equipment for switching at 3- and 4-wire direct current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.

TECHNICAL PARAMETERS

Operating distance, Sn 8,0 mm
Hysteresis, h 4-15%
Supply voltage, Us 10…30 Vdc (Ripple ±10%)
Output voltage (max), Uout 35 Vdc (open collector)
Residual voltage (max), Ures 0,8 V (I = 250 mA)
Load current (max), Iout 250 mА
Protection of output (scanning), Iprot 350 mA (25°С)
Current consumption, Is 9 mA
Switching frequency (max), fo 400 Hz (Sn=4,0 mm)
Time of fall and rise, tf / tr 0,2 µs / 0,6 µs
Operating temperature range, Tamb -25°…+70° C
Degree of protection IP67 (IEC144)
Light output indicator LED
Joining M12 connector, 4-pins
Overall dimensions M18x1, L=60 mm
Housing - plastic PVC

Scheme of connection

OUTPUT CHARACTERISTIC

Overall dimensions (mm)

Overall dimensions of inductive sensor M18C, L=60

TYPE PARAMETERS OF 4-WIRE UNSHILDED INDUCTIVE SENSORS WITH CONNECTOR - M18, DC

TYPE OUTPUT FUNCTION
P1-18.10.KCPNP / NO+NC
P1-18.20.KCNPN / NO+NC