M18 inductive proximity sensor P1-18.61.K

Sn=8.0mm, 2-wire, NO, 8-30VDC, 1-80mA, M18x49mm

Price 25.2 EUR no VAT

Unshielded type P1-18.61.K proximity inductive sensor for direct current with cylindrical plastic housing M18x49mm, with normally open contact. The maximum distance of operation of the proximity sensor is 8,0mm. The sensor ends with a 2-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the inductive sensor. The sensor's output is protected of overload and short circuit.

FEATURES

The M18 unshielded inductive proximity sensor is used in industrial systems, as automation equipment for switching at 2-wire direct current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.

TECHNICAL PARAMETERS

Nominal switching distance, Sn	8.0 mm ±4%
Measuring plate steel, St 37	18x18x1 mm
Hysteresis, h	5 ... 12%
Supply voltage, Us	8 … 30 Vdc (Ripple ±10%)
Residual voltage (max), Ures	3.6 V (I = 80 mA)
Load current, Iout	1 ... 80 mА
Current protection of the output (impulse), Iprot	125 mA (25°С)
Current consumption (max), Is	0.2 mA
Switching frequency (max), fo	400 Hz (Sn=4.0 mm)
Switching time, fall and rise, tf / tr	400 µs / 20 µs
Operating temperature range, Tamb	-25° … +70° C
Degree of protection	IP67 (IEC144)
Light output indicator	LED
Joining - cable “LIYY“	2x0.25 mm², L=2 m, PVC, grey
Overall dimensions	M18x1, L = 49 mm
Housing materia	PVC