M18 inductive proximity sensor with connector M1-18.61.KC

Sn=5.0mm, 2-wire, NO, 8-30VDC, 1-80mA, M18x60mm

Price 33.8 EUR no VAT

Shielded type M1-18.61.KC proximity inductive sensor for direct current with cylindrical metallic housing M18x60mm, with normally open contact. The maximum distance of operation of the proximity sensor is 5,0mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's output is protected of overload and short circuit.

FEATURES

The shielded type M18 inductive proximity sensor with connector is used in industrial systems, as automation equipment for switching at 2-wire direct current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.

TECHNICAL PARAMETERS

Operating distance, Sn 5,0 mm
Hysteresis, h 4-15%
Supply voltage, Us 8…30 Vdc (Ripple ±10%)
Residual voltage (max), Ures 3,6 V (I = 80 mA)
Load current, Iout 1 ... 80 mА
Protection of output (scanning), Iprot 125 mA (25°С)
Current consumption, Is 0,2 mA
Switching frequency (max), fo 600 Hz (Sn=2,5 mm)
Time of fall and rise, tf / tr 400 µs / 20 µs
Operating temperature range, Tamb -25°…+70° C
Degree of protection IP67 (IEC144)
Light output indicator LED
Joining M12 connector, 4-pins
Overall dimensions M18x1, L=60 mm
Housing - metallic CuZn (Ni plated)

Scheme of connection

OUTPUT CHARACTERISTIC

Overall dimensions (mm)

Overall dimensions of inductive sensor M18C, L=60

TYPE PARAMETERS OF 2-WIRE SHILDED INDUCTIVE SENSORS WITH CONNECTOR - M18, DC

TYPE OUTPUT FUNCTION
M1-18.61.KCNO
M1-18.62.KCNC