M30 inductive proximity sensor P1-30.61.K

Sn=14mm, 2-wire, NO, 8-30VDC, 1-80mA, M30x53mm

Price 26.78 EUR no VAT

Unshielded type P1-30.61.K proximity inductive sensor for direct current with cylindrical plastic housing M30x53mm, with normally open contact. The maximum distance of operation of the proximity sensor is 14mm. The sensor ends with a 2-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the inductive sensor. The sensor's output is protected of overload and short circuit.

FEATURES

The M30 unshielded inductive proximity sensor is used in industrial systems, as automation equipment for switching at 2-wire direct current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.

TECHNICAL PARAMETERS

Nominal switching distance, Sn 14.0 mm ±4%
Measuring plate steel, St 37 30x30x1 mm
Hysteresis, h 5 ... 12%
Supply voltage, Us 8 … 30 Vdc (Ripple ±10%)
Residual voltage (max), Ures 3.6 V (I = 80 mA)
Load current, Iout 1 ... 80 mА
Current protection of the output (impulse), Iprot 125 mA (25°С)
Current consumption (max), Is 0.2 mA
Switching frequency (max), fo 150 Hz (Sn=7.0 mm)
Switching time, fall and rise, tf / tr 400 µs / 20 µs
Operating temperature range, Tamb -25° … +70° C
Degree of protection IP67 (IEC144)
Light output indicator LED
Joining - cable “LIYY“ 2x0.25 mm², L=2 m, PVC, grey
Overall dimensions M30x1.5, L = 53 mm
Housing materia PVC

Scheme of connection

OUTPUT CHARACTERISTIC

Dependence of the residual voltage (U res) on the output current (I out)

Overall dimensions (mm)

Overall dimensions of inductive sensor M30, L=53

TYPE PARAMETERS OF 2-WIRE UNSHILDED INDUCTIVE SENSORS M30, DC

TYPE OUTPUT FUNCTION
P1-30.61.KNO
P1-30.62.KNC