M30 inductive proximity sensor with connector P1-30.61.KC

Sn=14mm, 2-wire, NO, 8-30VDC, 1-80mA, M30x64mm

Price 34.84 EUR no VAT

Unshielded type P1-30.61.KC proximity inductive sensor for direct current with cylindrical plastic housing M30x64mm, with normally open contact. The maximum distance of operation of the proximity sensor is 14,0mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's output is protected of overload and short circuit.

FEATURES

The unshielded type M30 inductive proximity sensor with connector is used in industrial systems, as automation equipment for switching at 2-wire direct current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.

TECHNICAL PARAMETERS

Operating distance, Sn 14,0 mm
Hysteresis, h 4-15%
Supply voltage, Us 8…30 Vdc (Ripple ±10%)
Residual voltage (max), Ures 3,6 V (I = 80 mA)
Load current, Iout 1 ... 80 mА
Protection of output (scanning), Iprot 125 mA (25°С)
Current consumption, Is 0,2 mA
Switching frequency (max), fo 150 Hz (Sn=7,0 mm)
Time of fall and rise, tf / tr 400 µs / 20 µs
Operating temperature range, Tamb -25°…+70° C
Degree of protection IP67 (IEC144)
Light output indicator LED
Joining M12 connector, 4-pins
Overall dimensions M30x1.5, L=64 mm
Housing - plastic PVC

Scheme of connection

OUTPUT CHARACTERISTIC

Overall dimensions (mm)

Overall dimensions of inductive sensor M30, L=64

TYPE PARAMETERS OF 2-WIRE UNSHILDED INDUCTIVE SENSORS WITH CONNECTOR - M30, DC

TYPE OUTPUT FUNCTION
P1-30.61.KCNO
P1-30.62.KCNC