M8 inductive proximity sensor P1-08.12.K
Sn=2.5mm, 3-wire, PNP/NC, 9-36VDC, 250mA, M8x40mm
Unshielded type P1-08.12.K proximity inductive sensor for direct current with cylindrical plastic housing M8x40mm, with PNP output type, with one normally closed contact. The maximum distance of operation of the proximity sensor is 2,5mm. The sensor ends with a 3-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the inductive sensor. The sensor is protected against incorrect connection of cables, overload and short circuit at the output.
FEATURES
The presented unshielded type M8 inductive proximity sensor is used in industrial systems, as automation equipment for switching at 3-wire direct current electrical circuits. It is activated by approaching of metallic object to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.
TECHNICAL PARAMETERS
Nominal switching distance, Sn | 2.5 mm ±4% |
Measuring plate steel, St 37 | 8x8x1 mm |
Hysteresis, h | 5 ... 12% |
Supply voltage, Us | 9 … 36 Vdc (Ripple ±10%) |
Output voltage (max), Uout | 39 Vdc (open drain) |
Residual voltage (max), Ures | 0.8 V (I = 250 mA) |
Load current (max), Iout | 250 mА |
Current protection of the output (impulse), Iprot | 350 mA (25°С) |
Current consumption (max), Is | 7 mA |
Switching frequency (max), fo | 1200 Hz (Sn=1.2 mm) |
Switching time, fall and rise, tf / tr | 2 µs / 2 µs |
Operating temperature range, Tamb | -25° … +70° C |
Degree of protection | IP67 (IEC144) |
Light output indicator | LED |
Joining - cable “LIYY“ | 3x0.25 mm², L=2 m, PVC, grey |
Overall dimensions | M8x1, L=40 mm |
Housing material | PVC |
Overall dimensions (mm)
Type parameters of 3-wire unshielded inductive sensors with cable M8/K, DC
TYPE | OUTPUT FUNCTION |
---|---|
P1-08.11.K | PNP / NO |
P1-08.12.K | PNP / NC |
P1-08.21.K | NPN / NO |
P1-08.22.K | NPN / NC |