Rotary encoder E50-02B-60

n=60, NPN outputs (A, B, C), Us=8-30Vdc, 100mA, Ø50x45mm, axis Ø6

Price 69.83 EUR no VAT

The rotary encoder E50-02B-60 has three outputs A, B and C and is supplied with a 8...30Vdc voltage. The encoder produces overlapping series of 60 impulses per revolution at the outputs A and B, and one impulse per revolution at output C. The encoder's outputs are NPN type and are connected with 5,6K resistor to the plus of the power cable. The encoder is made of aluminum housing with dimensions Ø50x45mm and has connecting axis with diameter 6mm. It ends with a shielded cable with connector "Canon 9" with length 1m.

Application and operating principle

The incremental rotary encoder E50-02 serves to convert the angular displacements into electrical impulses. There is three output signals: A, B and C. The output electrical signals A and B are dephased and can be used to determine the direction of rotation of the axes. The output electrical signal C is short single electrical impulse for one complete turning of axle of the device of 360º. The encoder is used widely into practice as a device for automatization of different production processes.

TECHNICAL PARAMETERS

Pulses per revolution, n	60
Outputs	A, B, C
Outputs A and B shifted on phases	30°... 90° el.
Supply voltage, Us	8...30 VDC (Ripple ±10%)
Residual voltage, Ures	0,45V (I=20mA)
Load current (max), Iout	100 mA
Current consumption, Is	25 mA
Operating frequency(max), fo	10 KHz
Fall time and Rise time, tf / tr	0.1 µs / 0.2 µs
Operating temperature range, Tamb	-10°…+50° C
Degree of protection	IP41
Permissible level of moisture	85% (at 25°С)
Shaft loading (max), radial / thrust	10 N / 5 N
Joining cable	4х0,25mm2 + shield; L=1m
Joining connector	Canon “DB9PM” (male)
Overall dimensions	Ø50х45