34 mm capacitive proximity sensor CP2-34.10.K

Sn=15mm, 4-wire, PNP/NO+NC, 9-36VDC, 250mA, Ø34x70mm

Price 44.2 EUR no VAT

Unshielded type CP2-34.10.K capacitive proximity sensor for direct current with plastic housing Ø34x70mm, with output type PNP, with one normally open and one normally closed contact. The maximum distance of operation of the capacitive sensor is 15mm. The sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the sensor. The capacitive sensor is protected against incorrect cable connection, current overload and short circuit of the outputs.

FEATURES

The unshielded type ø34 capacitive proximity sensor is used in industrial systems, as an automation equipment for switching 3- and 4-wire direct current electrical circuits. Its output is activated when metallic or non-metallic objects approach its active part. The sensor has a potentiometer for adjusting the distance of action Sn. The capacitive proximity sensor has a long service life thanks to the non-contact switching of the electrical circuits in which it is included.

TECHNICAL PARAMETERS

Nominal sensing distance, Sn	15 mm
Measuring plate steel, St 37	30x30x1 mm
Hysteresis, h	10...20%
Temperature drift, dr (max)	±20% (Sn)
Supply voltage, Us	9…36 VDC (Ripple ±10 %)
Output voltage (max), Uout	39 Vdc (open drain)
Residual voltage (max), Ures	0.8 V (I = 250 mA)
Load current (max), Iout	250 mА
Protection of output (scanning), Iprot	350 mA (25°С)
Current consumption, Is	7 mA
Switching frequency (max), fo	10 Hz (Sn=8.0 mm)
Sensitivity adjustment	0...Sn
Operating temperature range, Tamb	-15º...+75º C
Degree of protection	IP54
Output light indicator	LED
Joining - cable "LIYY"	4x0.25 mm², L=2 m, PVC, grey
Overall dimensions	Ø34, L=70 mm
Housing material	PVC