Digital speedometer SMD6-1M/220V
V=(0.01 ÷ 9999.99 m/min), Us=220Vac, 95x49x113mm
The digital SMD6-1M/220V speedometer is a microprocessor device with a 6-digit display and serves for measuring linear speeds in the range of 0,01 to 9999,99 m/min. By setting a conversion coefficient "C" the received electrical impulses in the speedometer are converted into a linear speed. The speedometer receives a signal from sensors and switches type "NPN" connected to his input. The device is designed for installation in a dashboard (panel montage).
The digital SMD6-1M speedometer is meant for measuring the linear speed of cloths, pipes and other materials, that in their movement whirl a check-roller, from which by certain sensor electric impulses are sent to the input of the speedometer. For counting the speed, in the memory of the speedometer is given the coefficient "C", which presents the real distance between two impulses in the input of the speedometer. The coefficient “C” is assigned in centimetres.
|Digital indication, LED - red||6 digits, h=10 mm (height)|
|Measuring range, V||0,01 ... 9999,99 m/min|
|Supply voltage, Us||220VAC ±10%|
|Power consumption, P||4W (16mA)|
|Frequency range of the input pulses, f||0,05Hz ... 1kHz (11kHz, option)|
|Operating temperature, Tamb||-20º...+50º C|
|Degree of protection||IP40|
|Overall dimensions||95х49х113 mm|
|Coefficient, C (cm)||0.01 ÷ 999.99|
Schemes of connection
Scheme of connection of NPN sensor to the speedometer input
Scheme of connection of switch K1 to the speedometer input
PNP sensor connection diagram
Scheme of connection of PNP sensor to the input of the speedometer with the addition of a 2K resistor
Overall dimensions (mm)
The SMD6-1M digital speedometer is an electronic device used as a means of automation production processes. It is used to convert the incoming electrical pulses into a linear speed (m/min) and its visualization on a digital display.
Typical parameters of SMD6-1M digital speedometer
|SMD6-1M / 12-24V||11÷31VDC / 11÷27VAC||2W (85mA)|
|SMD6-1M / 220V||220VAC ±10%||4W (16mA)|