M30 proximity inductive sensor P1-30.71.U0

Sn=14mm, 2-wire, NO, 12-250Vac, 5-400mA, M30x61mm

Price 27.3 EUR no VAT
NEW / FEBRUARY 2024

Unshielded type P1-30.71.U0 proximity inductive sensor for alternating current with cylindrical plastic housing M30x61mm, with normally open contact. The maximum distance of operation of the proximity sensor is 14mm. The sensor ends with a 2-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the inductive sensor.

FEATURES

The presented M30 inductive proximity sensor is used in industrial systems, as automation equipment for switching at 2-wire alternating current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.

TECHNICAL PARAMETERS

Nominal switching distance, Sn 14.0 mm ±4%
Measuring plate steel, St 37 30x30x1 mm
Hysteresis, h 5 ... 12%
Operating voltage, Us 12 … 250 Vac / 40...60 Hz
Load current, Iout 5 ... 400 mА
Residual voltage, Ures 4.0 Vac (15...400 mA)
5.5 Vac (5...15 mA)
Current consumption (max), Is 1 mA
Switching frequency (max), fo 25 Hz
Operating temperature range, Tamb -25° … +70° C
Degree of protection IP67 (IEC144)
Output element Thyristor
Light output indicator LED
Protection when switching on without load NO
Protection against reverse connection YES
Joining - cable "LIYY" 2x0.5 mm², L=2 m, PVC, grey
Overall dimensions M30x1.5, L=61 mm
Housing material PVC

Scheme of connection

Scheme 71

OUTPUT CHARACTERISTIC

Dependence of the residual voltage (U res) on the output current (I out)

Overall dimensions (mm)

Overall dimensions of inductive sensor M30, L=61

TYPE PARAMETERS OF 2-WIRE UNSHILDED INDUCTIVE SENSORS M30, AC

TYPE OUTPUT FUNCTION SCHEME OF CONECTION
P1-30.71.U0NOScheme 71
P1-30.72.U0NCScheme 72