M12 inductive proximity sensor M1-12.62.K

Sn=3.3mm, 2-wire, NC, 8-30VDC, 1-80mA, M12x45mm

Price 26.25 EUR no VAT

Shielded type M1-12.62.K proximity inductive sensor for direct current with cylindrical metallic housing M12x45mm, with normally closed contact. The maximum distance of operation of the proximity sensor is 3,3mm. The sensor ends with a 2-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the inductive sensor. The sensor's output is protected of overload and short circuit.

FEATURES

The M12 shielded inductive proximity sensor is used in industrial systems, as automation equipment for switching at 2-wire direct current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.

TECHNICAL PARAMETERS

Nominal switching distance, Sn	3.3 mm ±4%
Measuring plate steel, St 37	12x12x1 mm
Hysteresis, h	5 ... 12%
Supply voltage, Us	8 … 30 Vdc (Ripple ±10%)
Residual voltage (max), Ures	3.6 V (I = 80 mA)
Load current, Iout	1 ... 80 mА
Current protection of the output (impulse), Iprot	125 mA (25°С)
Current consumption (max), Is	0.2 mA
Switching frequency (max), fo	1000 Hz (Sn=1.6 mm)
Switching time, fall and rise, tf / tr	400 µs / 20 µs
Operating temperature range, Tamb	-25° … +70° C
Degree of protection	IP67 (IEC144)
Light output indicator	LED
Joining - cable “LIYY“	2x0.25 mm², L=2 m, PVC, grey
Overall dimensions	M12x1, L = 45 mm
Housing materia	CuZn (Ni plated)