M30 inductive sensor with connector P1-30.72.CU0
Sn=14.0mm, 2-wire, NC, 12-250Vac, 5-500mA, M30x64mm
Unshielded type P1-30.72.CU0 proximity inductive sensor with connector for alternating current with cylindrical plastic housing M30x64mm, with normally closed contact. The maximum distance of operation of the proximity sensor is 14.0mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor.
FEATURES
The presented M30 inductive proximity sensor with connector is used in industrial systems, as automation equipment for switching at 2-wire alternating current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.
TECHNICAL PARAMETERS
| Nominal sensing distance, Sn | 14.0 mm ±4% |
| Measuring plate steel, St 37 | 30x30x1 mm |
| Hysteresis, h | 5-12% |
| Operating voltage, Us | 12 … 250 Vac / 40...60 Hz |
| Load current, Iout | 5 ... 500 mА |
| Residual voltage, Ures | 4.0 Vac & 15...500 mA |
| 5.5 Vac & 5...15 mA | |
| Current consumption, Is | 1 mA |
| Switching frequency (max), fo | 25 Hz |
| Operating temperature range, Tamb | -25°…+70° C |
| Degree of protection | IP67 (IEC144) |
| Output element | Thyristor |
| Light output indicator | LED |
| Protection when switching on without load | NO |
| Protection against reverse connection | YES |
| Joining | M12 connector, 4-pins |
| Overall dimensions | M30x1.5, L=64 mm |
| Housing material | PVC |
Scheme of connection
OUTPUT CHARACTERISTIC
Overall dimensions (mm)
TYPE PARAMETERS OF 2-WIRE UNSHILDED INDUCTIVE SENSORS WITH CONNECTOR M30, AC
| TYPE | OUTPUT FUNCTION | SCHEME OF CONECTION |
|---|---|---|
| P1-30.71.CU0 | NO | Scheme 71C |
| P1-30.72.CU0 | NC | Scheme 72C |
