M8 inductive proximity sensor with connector M1-08.10.KCA

Sn=1.7mm, 4-wire PNP/NO+NC, 9-36VDC, 100mA, M8x60mm

Price 33.80 € no VAT

NEW / August 2025

Shielded type M1-08.10.KCA proximity inductive sensor for direct current with cylindrical metallic housing M8x60mm, with PNP output type, with one normally open and one normally closed contact. The maximum distance of operation of the proximity sensor is 1,7mm. The sensor ends with a 4-pin M12 male connector and has an LED indicator showing the output state of the inductive sensor. The sensor is protected against incorrect connection of cables, overload and short circuit at the outputs.

FEATURES

The M8 shielded inductive proximity sensor with connector is used in industrial systems, as automation equipment for switching at 3- and 4-wire direct current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.

TECHNICAL PARAMETERS

Nominal switching distance, Sn	1.7 mm ±4%
Measuring plate (St 37)	8x8x1 mm
Hysteresis, h	5 ... 12%
Supply voltage, Us	9 … 36 Vdc (Ripple ±10%)
Output voltage (max), Uout	39 Vdc (open drain)
Residual voltage (max), Ures	0.8 V (I = 100 mA)
Load current (max), Iout	100 mА (Option: 250 mA)
Current protection of the output (recoverable), Iprot	250 mA (25°С)
Current consumption (max), Is	6 mA
Capacitive load (max), CL	100 µF
Switching frequency (max), fo	1200 Hz (Sn=0.8 mm)
Switching time, fall and rise, tf / tr	2 µs / 2 µs
Operating temperature range, Tamb	-25° … +70° C
Degree of protection	IP67 (IEC144)
Light output indicator	LED
Joining	M12 connector, 4-pins
Overall dimensions	M8x1, L=60 mm
Housing material	CuZn (Ni plated)