English flag EN
ESA Control
Send request

Digital pulse counter CD6-5R/12-24V

N=(1 - 999999), Us=12÷24V ac/dc, Output 4A/220V, 95x49x113mm

Digital pulse counter
Price 74.03 EUR no VAT

The CD6-5R/12-24V digital pulse counter is a microprocessor device with a 6-digit display. It counts up to 999999 and has one output relay. The counter is reversible and can sum and subtract pulses. It has two inputs "A" and "B", and operate together with an encoder or a sensor with two phase-shifted outputs type "NPN" (OVM1-18.24.F). Programmatically can be set various parameters defining the operation of the counter. The device has an energy-independent memory. The pulse counter is designed for installation in a dashboard (panel montage).

FEATURES

The CD6-5R digital pulse counter is a compact microprocessor device that serves to sum and subtract electrical impulses. It is designed to operate in combination with an encoder or a sensor with two phase-shifted outputs type "NPN". The counter visualizes only positive numbers. Except counting the impulses, its main function of the counter is to switch the electric circuit, in which it is turned on when a set value "N" is reached. The pulse counter is widely used in automation of production, technological and other processes.

TECHNICAL PARAMETERS

Digital indication, LED - red 6 digits, h=10mm (height)
Counting range, N 1 … 999999 (pulses)
Inner divisor, d 1 … 9999
Supply voltage, Us 12÷24V ac/dc (11÷31Vdc / 11÷27Vac)
Power consumption, P 2 W (85 mA)
Output - Relay (NO+NC) 4A / 220VAC
Maximum counting frequency, Fmax 11 kHz
Operating temperature, Tamb -20º...+50º C
Degree of protection IP40
Joining Terminal block
Overall dimensions 95х49х113 mm

Non-volatile memory for programmable parameters.
Counting inputs "A" and "B" - designed to operate with encoder type NPN (Fig. 1 and 2).
A constant voltage of 11÷23 Vdc (40mA) is provided to power the encoder.
Input for external reset, "Reset" - switch K3 (Fig. 1 and 2).
Input for external start, "Start" - switch K2 (Fig. 1 and 2).
ATTENTION: With the K2 switch permanently closed, the counter operates in cyclic mode.

Programmable parameters

Limit value of pulses, N 1 ÷ 999999
Inner divisor,  d 1 ÷ 9999
Time between two adjacent pulses (00 = infinity),  t (sec) 0.0 ÷ 999.9
Active input front (high / low),  In Hi / Lo
Interruption of the supply voltage,  Us :
      - after an interruption, the counting continues from the current data Cont
      - after an interruption, the counting automatically starts from the beginning Full
      - after an interruption, a stop mode of the current data is established Ucc
      - after an interruption, the counter is reset Goto
Automatic start when the power is turned on for the first time no / Auto
Initial state of the output relay (Status),  St ⌈‾⌉  /  ⌉_⌈
Upon reaching N:  is reset  / the output turns off, the counting continues End G / End C

Schemes of connection

Scheme of connection of NPN encoder to CD6-5R and LMD6-2R counter

Fig.1

Connecting an NPN encoder to the counter input

Scheme of connection of two NPN sensors to CD6-5R and LMD6-2R counter

Fig.2

Connection of two NPN sensors to the input of the counter

PNP encoder connection diagram

Scheme of connection of PNP encoder to controller

Fig.3

Connect a PNP sensor to the counter input by adding two 2K / 0.5W resistors

Overall dimensions (mm)

Overall dimensions of the housing 95x49x113 of the controller for panel mounting

Short description

The CD6-5R digital pulse counter is an electronic device used as a means of automating production processes. Used for switching direct current and alternating current electrical circuits.

Typical parameters of pulse counter CD6-5R

TYPE SUPPLY VOLTAGE CONSUMPTION
CD6-5R / 12-24V11÷31VDC / 11÷27VAC2W (85mA)
CD6-5R / 220V220VAC ±10%4W (16mA)