Revolution counter CMD6-2/12-24V
W=(3 ÷ 60'000 rpm), Us=12÷24V ac/dc, 2 outputs 4A/220V, 95x49x113mm
The CMD6-2/12÷24V digital revolution counter is a microprocessor device with a 6-digit display and serves for measuring revolutions in the range from 3 to 60'000 rpm. The rev counter has two output relays and there can be set two limit values "W1" and "W2" in reaching of which the relevant output relay switches on. The digital rev counter receives a signal from sensors and switches type "NPN" connected to his input. The tachometer is designed for installation in a dashboard (panel montage).
FEATURES
The CMD6-2 digital revolution counter is a compact microprocessor device, which serves to measure and controlling revolutions of rotation of axles, motor rotors and other turning objects. It is designed for combined work with inductive, photoelectric and other sensors, from which pulses are sent to the input of the rev-counter. For the correct work of the system “rev-counter - sensor" it is necessary to sending one impulse from the sensor to the revolution counter for one full rotation of the object. There can be assign two limit values of the revolutions “W1" and "W2" the reaching of which, activates the respective output relay. By pressing the "sec" and "Hz" buttons, the period of rotation of the axis in seconds (sec) and the frequency in hertz (Hz) is shown on the display of the tachometer.
TECHNICAL PARAMETERS
| Digital indication, LED - red | 6 digits, h=10 mm (height) |
| Range of revolutions measurement, W | 3 ... 60’000 rpm (600'000 rpm option) |
| Supply voltage, Us | 12÷24V ac/dc (11÷31Vdc / 11÷27Vac) |
| Power consumption, P | 3 W (125 mA) |
| Output - Relay-1 (W1) | 4A/220VAC (NO+NC) |
| Output - Relay-2 (W2) | 4A/220VAC (NO+NC) |
| Maximum frequency of the input pulses | 1 kHz (11 kHz option) |
| Measurement error | ±0,05% |
| Operating temperature, Tamb | -20º...+50º C |
| Degree of protection | IP40 |
| Joining | Terminal block |
| Overall dimensions | 95х49х113 mm |
Programmable parameters
| Limit value, W1 (rpm) | 3 ÷ 60'000 |
| Limit value, W2 (rpm) | 3 ÷ 60'000 |
Schemes of connection
Fig.1
Scheme of connection of NPN sensor to the input of the rev-counter
Fig.2
Scheme of connection of switch K1 to the input of the rev-counter
PNP sensor connection diagram
Fig.3
Scheme of connection of PNP sensor to the input of the rev-counter by adding a resistor 2K / 0.5W.
Overall dimensions (mm)
Short description
The CMD6-2 digital tachometer is an electronic device used as a means of automating production processes. Serves to convert the electrical impulses received to it in revolutions (rpm). The main purpose of the tachometer is to visualize the measured revolutions on a digital display and when a certain limit value is reached to turn off or on the electrical circuit to which it is connected.
Documentation
Typical parameters of digital tachometer CMD6-2
| TYPE | SUPPLY VOLTAGE | CONSUMPTION |
|---|---|---|
| CMD6-2 / 12-24V | 11÷31VDC / 11÷27VAC | 3W (125mA) |
| CMD6-2 / 220V | 220VAC ±10% | 4W (16mA) |
