Revolution counter CMD6-3R/12-24V

W=(3 ÷ 60'000 rpm), Us=12÷24V ac/dc, 95x49x113mm

Price 65.1 EUR no VAT

The CMD6-3R/12-24V digital revolution counter is a microprocessor device with a 6-digit display and serves for measuring revolutions in the range from 3 to 60'000 rpm. The rev counter is reversible and has two inputs "A" and "B". It operates in combination with two sensors type "NPN" or one sensor type "NPN" with two dephased outputs (OVM1-18.24.F). The revolution counter indicates the rotation direction of the shaft by means of two LEDs located on the front panel. The tachometer is designed for installation in a dashboard (panel montage).

FEATURES

The CMD6-3R digital revolution counter is used to measuring revolutions of rotation of axles and other turning objects, and shows the direction of their rotation. The rev counter is designed to work with NPN type sensor with two dephased outputs "OVM1-18.24.F" (encoder type) or with a combination of two NPN type sensors. For the correct work of the system “revolution counter - sensor" is necessary to enter one impulse from the sensor to the revolution counter for one full rotation of the object.

TECHNICAL PARAMETERS

Digital indication, LED - red 6 digits, h=10 mm (height)
Range of revolutions measurement, W 3 ... 60’000 rpm (600'000 rpm option)
Supply voltage, Us 12÷24V ac/dc (11÷31Vdc / 11÷27Vac)
Power consumption, P 2 W (85 mA)
Maximum input frequency, Fmax 1 kHz (11 kHz option)
Measurement error ±0,05%
Operating temperature range, Tamb -20º...+50º C
Degree of protection IP40
Joining Terminal block
Overall dimensions 95х49х113 mm

Schemes of connection

Wiring diagram of NPN encoder to the input of the CMD6-3R rev-counter

Fig.1

Scheme of connection of NPN encoder to the input of the rev-counter

Wiring diagram of tow NPN sensor to the input of the CMD6-3R rev-counter

Fig.2

Scheme of connection of two NPN sensors to the input of the rev-counter

PNP encoder connection diagram

Scheme of connection of PNP encoder to controller

Fig.3

Scheme of connection of PNP encoder to the input of the rev-counter by adding a resistor 2K / 0.5W.

Illustration

Installation of shielded sensors for operation with CMD6-3R rev-counter

Fig.4

Method of mounting shielded sensors for determining the direction of rotation of shafts using the CMD6-3R revolution counter.

Installation of unshielded sensors for operation with CMD6-3R rev-counter

Fig.5

Method of mounting unshielded sensors for determining the direction of rotation of shafts using the CMD6-3R revolution counter.

Overall dimensions (mm)

Overall dimensions of the housing 95x49x113 of the controller for panel mounting

Short description

The CMD6-3R digital tachometer is an electronic device used as a means of automating production processes. Serves to convert the electrical impulses received to it in revolutions (rpm). The main purpose of the tachometer is to visualize the measured revolutions on a digital display and to indicate the direction of rotation of the shaft.

Typical parameters of digital tachometer CMD6-3R

TYPE SUPPLY VOLTAGE CONSUMPTION
CMD6-3R / 12-24V11÷31VDC / 11÷27VAC2W (85mA)
CMD6-3R / 220V220VAC ±10%4W (16mA)