Square inductive sensor with connector P3-60.71.CU0

Sn=12.5mm, 2-wire, NO, 12-250Vac, 5-300mA, 72x30x15mm

Price 34.84 EUR no VAT
NEW / MARCH 2024

Unshielded type P3-60.71.CU0 proximity inductive sensor with connector for alternating current with parallelepipedal plastic housing 72x30x15mm, with normally open contact. The maximum distance of operation of the proximity sensor is 12,5mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor.

FEATURES

The presented P3-60 inductive proximity sensor with connector is used in industrial systems, as automation equipment for switching at 2-wire alternating current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.

TECHNICAL PARAMETERS

Nominal sensing distance, Sn 12.5 mm ±4%
Measuring plate steel, St 37 30x30x1 mm
Hysteresis, h 5-12%
Temperature drift ±15% (Sn)
Supply voltage, Us 12 … 250 Vac / 40...60 Hz
Load current, Iout 5 ... 300 mА
Residual voltage, Ures 4.0 Vac & 15...300 mA
5.5 Vac & 5...15 mA
Current consumption, Is 1 mA
Switching frequency (max), fo 25 Hz
Operating temperature range, Tamb -25°…+70° C
Degree of protection IP67 (IEC144)
Output element Thyristor
Light output indicator LED
Short circuit protection NO
Protection against reverse connection YES
Joining M12 connector, 4-pins
Overall dimensions 72x30x15 mm
Housing material PA6 (Polyamide)

Scheme of connection

Scheme 71C

OUTPUT CHARACTERISTIC

Overall dimensions (mm)

Overall dimensions of inductive sensor P3-60C, L=60

TYPE PARAMETERS OF 2-WIRE UNSHILDED INDUCTIVE SENSORS WITH CONNECTOR P3-60, AC

TYPE OUTPUT FUNCTION SCHEME OF CONECTION
P3-60.71.CU0NOScheme 71
P3-60.72.CU0NCScheme 72