M12 inductive proximity sensor P1-12.20.SK

Sn=5.0mm, 4-wire, NPN/NO+NC, 9-36VDC, 100mA, M12x33mm

Price 24.96 EUR no VAT

NEW / April 2024

Unshielded type P1-12.20.SK proximity inductive sensor for direct current with cylindrical metallic housing M12x33mm, with NPN output type, with one normally open and one normally closed contact. The maximum distance of operation of the proximity sensor is 5,0mm. The sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the inductive sensor. The sensor is protected against incorrect connection of cables, overload and short circuit at the outputs.

FEATURES

The presented unshielded type M12 inductive proximity sensor is used in industrial systems, as automation equipment for switching at 3- and 4-wire direct current electrical circuits. It is activated by approaching of metallic object to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.

TECHNICAL PARAMETERS

Nominal sensing distance, Sn	5.0 mm ±4%
Measuring plate steel, St 37	12x12x1 mm
Hysteresis, h	5...12%
Supply voltage, Us	9…36 Vdc (Ripple ±10%)
Output voltage (max), Uout	39 Vdc (open drain)
Load current (max), Iout	100 mА (option 250 mA)
Residual voltage (max), Ures	0,8 V (I = 100 mA)
Protection of output (recoverable), Iprot	250 mA (25°С)
Current consumption, Is	6 mA
Switching frequency (max), fo	800 Hz (Sn=2.5 mm)
Time of fall and rise, tf / tr	2 µs / 2 µs
Operating temperature range, Tamb	-25°…+70° C
Degree of protection	IP67 (IEC144)
Light output indicator	LED
Joining - cable "LIYY"	4x0.25 mm², L=2 m, PVC, grey
Overall dimensions	M12x1, L=33 mm
Housing material	PVC