M18 inductive sensor with connector M1-18.72.CU0
Sn=5.0mm, 2-wire, NC, 12-250Vac, 5-400mA, M18x60mm
Shielded type M1-18.72.CU0 proximity inductive sensor with connector for alternating current with cylindrical plastic housing M18x60mm, with normally closed contact. The maximum distance of operation of the proximity sensor is 5.0mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor.
FEATURES
The presented M18 inductive proximity sensor with connector is used in industrial systems, as automation equipment for switching at 2-wire alternating current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.
TECHNICAL PARAMETERS
Nominal switching distance, Sn | 5.0 mm ±4% |
Measuring plate steel, St 37 | 18x18x1 mm |
Hysteresis, h | 5 ... 12% |
Operating voltage, Us | 12 … 250 Vac / 40...60 Hz |
Load current, Iout | 5 ... 400 mА |
Residual voltage, Ures | 4.0 Vac (15...400 mA) |
5.5 Vac (5...15 mA) | |
Current consumption (max), Is | 1 mA |
Switching frequency (max), fo | 25 Hz |
Operating temperature range, Tamb | -25° … +70° C |
Degree of protection | IP67 (IEC144) |
Output element | Thyristor |
Light output indicator | LED |
Protection when switching on without load | NO |
Protection against reverse connection | YES |
Joining | M12 connector, 4-pins |
Overall dimensions | M18x1, L=60 mm |
Housing material | CuZn (Ni plated) |
Overall dimensions (mm)
TYPE PARAMETERS OF 2-WIRE SHILDED INDUCTIVE SENSORS WITH CONNECTOR M18, AC
TYPE | OUTPUT FUNCTION | SCHEME OF CONECTION |
---|---|---|
M1-18.71.CU0 | NO | Scheme 71C |
M1-18.72.CU0 | NC | Scheme 72C |