M12 reflective photoelectric sensor ORP1-12.10.FKT

Sn=1.50m, PNP/NO+NC, 9-36VDC, 250mA, M12x56mm

Price 31.5 EUR no VAT

The ORP1-12.10.FKT infrared photoelectric retro-reflective sensor for direct current consists of a receiver and transmitter which are located in a cylindrical plastic housing M12x56mm. The output of the optical sensor is PNP type with one normally open and one normally closed contact. When using a Ø82mm reflector, the maximum distance of operation of the retro-reflective photoelectric sensor is 1,50m. The optoelectronic sensor ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the sensor. The optical sensor is protected against incorrect cable connection, current overload and short circuit of the outputs.

Application and operating principle

The presented M12 photoelectric reflective sensor serves to switch direct current circuits. The optical sensor emits infrared modulated ray of light which reflects on a reflector and returns back to the sensor. When an object passes between the sensor and the reflector, the ray of light becomes disconnected and the output of the sensor change state. When there is reflector in front of the sensor, the output indicator is on. The optical sensor has a potentiometer to adjust the sensitivity.

TECHNICAL PARAMETERS

Operating distance, Sn
- with reflector Ø82 mm (BRT84) 0,01 ÷ 1,50 m
- with reflector 51x51 mm (BRT69x51) 0,01 ÷ 0,60 m
- with reflective tape 55x55 mm (M31H55) 0,02 ÷ 0,50 m
Supply voltage, Us 9…36 VDC (Ripple ±10 %)
Residual voltage (max), Ures 0,8 V (I = 250 mA)
Load current (max), Iout 250 mА
Protection of output (scanning), Iprot 350 mA (25°С)
Current consumption, Is 10 mA
Switching frequency (max), fo 200 Hz
Spectrum area of operating 850…950 nm
Operating ambient illumination 10’000 Lx
Operating temperature range, Tamb -25°…+70° C
Degree of protection IP54
Light output indicator LED
Connection cable 4x0.25 mm², L=2 m, PVC
Overall dimensions M12x1, L=56 mm
Housing - plastic PVC

Scheme of connection

OUTPUT CHARACTERISTICS

Overall dimensions (mm)

Overall dimensions of ORP1-12 photoelectric sensor

Short description

The M12 reflective optoelectronic sensor which is used in industrial systems, as electronic automation equipment for switching at 3-wire and 4-wire electrical circuits of direct current. The optical sensor switches the electrical circuit in which it is connected when an object passes between it and the reflector. The reflective photoelectric sensor there is a longer period of work due to contactless switching of the electrical circuits in which is included.

TYPE PARAMETERS OF RETRO-REFLECTIVE PHOTOELECTRIC SENSORS M12, DC

TYPE OUTPUT FUNCTION
ORP1-12.10.FKTPNP / NO + NC
ORP1-12.20.FKTNPN / NO + NC