M30 through-beam photoelectric sensor OBP1-30.10.FKL
Sn=50m, PNP/NO+NC, 9-36VDC, 250mA, M30x80mm
The OBP1-30.10.FKL infrared photoelectric through-beam sensor for direct current operates in a wide range of ambient light. The sensor consists of a receiver and a transmitter which are located in two cylindrical plastic housings M30x80mm. The receiver is with output type PNP, with one normally open and one normally closed contact. The maximum distance of operation of the photoelectric sensor is 50m. The transmitter ends with a 2-wire PVC connecting cable with a length of 2m. The receiver ends with a 4-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state. The optical sensor is protected from improper inclusion of the cables, overcurrent and short-circuit at the outputs.
Application and operating principle
The presented M30/L photoelectric through-beam switch is used for operation in a wide range of ambient light - from dark to direct sunlight. Can be used indoors and outdoors. It is designed for switching direct current electrical circuits. The sensor is a system of two housings - transmitter and receiver, located opposite each other. They are interconnected by a modulated infrared light beam. When an object passes between the emitter and the receiver, the light beam is interrupted and the output of the receiver is switched from one state to another. The receiver output indicator lights up when the receiver output is active.
TECHNICAL PARAMETERS
Operating distance, Sn | 0...50 m |
Supply voltage, Us | 9…36 VDC (Ripple ±10 %) |
Residual voltage (max), Ures | 0,8 V (I = 250 mA) |
Load current (max), Iout | 250 mА |
Protection of output (scanning), Iprot | 350 mA (25ºС) |
Current consumption, Is | 27 mА (18mA / T + 9mA / R) |
Switching frequency (max), fo | 100 Hz |
Spectrum area of operating | 850…950 nm |
Operating ambient illumination | 0...180’000 Lx |
Operating temperature range, Tamb | -25º…+70º C |
Degree of protection | IP65 |
Light output indicator | LED |
Connection cable - transmitter | 2x0.25 mm², L=2 m, PVC |
Connection cable - receiver | 4x0.25 mm², L=2 m, PVC |
Overall dimensions | M30x1.5, L=80 mm |
Housing - plastic | PVC |
Scheme of connection
Overall dimensions (mm)
Short description
The M30/L optoelectronic barrier sensor is used in industrial systems, as electronic automation equipment for switching at 3-wire and 4-wire electrical circuits of direct current. When passing a nontransparent object between the receiver and the transmitter, the optical connection breaks and the receiver's output switches. The barrier photoelectric sensor there is a longer period of work due to contactless switching of the electrical circuits in which is included.
Documentation
TYPE PARAMETERS OF M30/L BARRIER PHOTOELECTRIC SENSORS, DC
TYPE | OUTPUT FUNCTION |
---|---|
OBP1-30.10.FKL | PNP / NO + NC |
OBP1-30.20.FKL | NPN / NO + NC |
OBP1-30.63.F | Transmitter |