Proximity inductive sensor P4-70.11.K
Sn=10.0mm, 3-wire, PNP/NO, 10-30VDC, 250mA, 70x35x24mm
Unshielded fork-type P4-70.11.K proximity inductive sensor for direct current with parallelepipedal plastic housing 70x35x24mm, with PNP output type, with one normally open contact. The working width of the slit of the inductive sensor is 10,0mm. The sensor ends with a 3-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the inductive sensor. The sensor's output are protected of overload and short circuit.
FEATURES
The presented unshielded type of slotted inductive sensor P4-70 is used in industrial systems, as automation equipment for switching at 3-wire direct current electrical circuits. It is activated when a metal object passes through the sensor slot. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.
TECHNICAL PARAMETERS
| Operating distance, Sn | 10,0 mm |
| Hysteresis, h | 4-15% |
| Supply voltage, Us | 10…30 Vdc (Ripple ±10%) |
| Output voltage (max), Uout | 35 Vdc (open collector) |
| Residual voltage (max), Ures | 0,8 V (I = 250 mA) |
| Load current (max), Iout | 250 mА |
| Protection of output (scanning), Iprot | 350 mA (25°С) |
| Current consumption, Is | 9 mA |
| Switching frequency (max), fo | 300 Hz |
| Time of fall and rise, tf / tr | 0,6 µs / 0,2 µs |
| Operating temperature range, Tamb | -25°…+70° C |
| Degree of protection | IP67 (IEC144) |
| Light output indicator | LED |
| Joining cable | 3x0.25 mm², L=2 m, PVC |
| Overall dimensions | 70x35x24 mm |
| Housing - plastic | PVC |
Scheme of connection
OUTPUT CHARACTERISTIC
Overall dimensions (mm)
Type parameters of 3- and 4-wire unshielded inductive sensors with cable P4-70, DC
| TYPE | OUTPUT FUNCTION |
|---|---|
| P4-70.10.K | PNP / NO+NC |
| P4-70.11.K | PNP / NO |
| P4-70.12.K | PNP / NC |
| P4-70.20.K | NPN / NO+NC |
| P4-70.21.K | NPN / NO |
| P4-70.22.K | NPN / NC |
