M18 inductive proximity sensor with connector M1-18.10.KC
Sn=5.0mm, 4-wire PNP/NO+NC, 10-30VDC, 250mA, M18x60mm
Shielded type M1-18.10.KC proximity inductive sensor for direct current with cylindrical metallic housing M18x60mm, with PNP output type, with one normally open and one normally closed contact. The maximum distance of operation of the proximity sensor is 5,0mm. The sensor ends with a 4-pin male connector M12 and has an LED indicator showing the output state of the inductive sensor. The sensor's outputs are protected of overload and short circuit.
FEATURES
The M18 shielded inductive proximity sensor with connector is used in industrial systems, as automation equipment for switching at 3- and 4-wire direct current electrical circuits. It is activated by approaching of metallic objects to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.
TECHNICAL PARAMETERS
Nominal switching distance, Sn | 5.0 mm ±4% |
Measuring plate steel, St 37 | 18x18x1 mm |
Hysteresis, h | 5 ... 12% |
Supply voltage, Us | 10 … 30 Vdc (Ripple ±10%) |
Output voltage (max), Uout | 35 Vdc (open collector) |
Residual voltage (max), Ures | 0.8 V (I = 250 mA) |
Load current (max), Iout | 250 mА |
Current protection of the output (impulse), Iprot | 350 mA (25°С) |
Current consumption (max), Is | 9 mA |
Switching frequency (max), fo | 600 Hz (Sn=2.5 mm) |
Switching time, fall and rise, tf / tr | 0.6 µs / 0.2 µs |
Operating temperature range, Tamb | -25° … +70° C |
Degree of protection | IP67 (IEC144) |
Light output indicator | LED |
Joining | M12 connector, 4-pins |
Overall dimensions | M18x1, L=60 mm |
Housing material | CuZn (Ni plated) |
Overall dimensions (mm)
TYPE PARAMETERS OF 4-WIRE SHILDED INDUCTIVE SENSORS WITH CONNECTOR - M18, DC
TYPE | OUTPUT FUNCTION |
---|---|
M1-18.10.KC | PNP / NO+NC |
M1-18.20.KC | NPN / NO+NC |