Proximity inductive sensor M1-30.22.K

Sn=9.5mm, 3-wire, NPN/NC, 10-30VDC, 250mA, M30x53mm

Price 27.83 EUR no VAT

Shielded type M1-30.22.K proximity inductive sensor for direct current with cylindrical metallic housing M30x53mm, with NPN output type, with one normally closed contact. The maximum distance of operation of the proximity sensor is 9,5mm. The sensor ends with a 3-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the inductive sensor. The sensor's output are protected of overload and short circuit.

FEATURES

The presented shielded type M30 inductive proximity sensor is used in industrial systems, as automation equipment for switching at 3-wire direct current electrical circuits. It is activated by approaching of metallic object to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.

TECHNICAL PARAMETERS

Operating distance, Sn 9,5 mm
Hysteresis, h 4-15%
Supply voltage, Us 10…30 Vdc (Ripple ±10%)
Output voltage (max), Uout 35 Vdc (open collector)
Residual voltage (max), Ures 0,8 V (I = 250 mA)
Load current (max), Iout 250 mА
Protection of output (scanning), Iprot 350 mA (25°С)
Current consumption, Is 9 mA
Switching frequency (max), fo 300 Hz (Sn=5,0 mm)
Time of fall and rise, tf / tr 0,2 µs / 0,6 µs
Operating temperature range, Tamb -25°…+70° C
Degree of protection IP67 (IEC144)
Light output indicator LED
Joining cable 3x0.25 mm², L=2 m, PVC
Overall dimensions M30x1.5, L=53 mm
Housing - metallic Al (Aluminum)

Scheme of connection

OUTPUT CHARACTERISTIC

Overall dimensions (mm)

Overall dimensions of inductive sensor M30, L=53

Type parameters of 3- and 4-wire shielded inductive sensors with cable M30, DC

TYPE OUTPUT FUNCTION
M1-30.10.KPNP / NO+NC
M1-30.11.KPNP / NO
M1-30.12.KPNP / NC
M1-30.20.KNPN / NO+NC
M1-30.21.KNPN / NO
M1-30.22.KNPN / NC