M8 inductive proximity sensor P1-08.21.S

Sn=2.5mm, 3-wire, NPN/NO, 9-36VDC, 250mA, M8x30mm

Price 25.2 EUR no VAT

Unshielded type P1-08.21.S proximity inductive sensor for direct current with cylindrical plastic housing M8x30mm, with NPN output type, with one normally open contact. The maximum distance of operation of the proximity sensor is 2,5mm. The sensor ends with a 3-wire PVC connecting cable with a length of 2m and has an LED indicator showing the output state of the inductive sensor. The sensor's output has no protection of short circuit.

FEATURES

The presented unshielded type M8/S inductive proximity sensor is used in industrial systems, as automation equipment for switching at 3-wire direct current electrical circuits. It is activated by approaching of metallic object to him active area. The inductive proximity sensor is resistant to moisture and dust. It has a long service life thanks to the non-contact switching of the electrical circuit in which it is connected.

TECHNICAL PARAMETERS

Nominal switching distance, Sn	2.5 mm ±4%
Measuring plate steel, St 37	8x8x1 mm
Hysteresis, h	5 ... 12%
Supply voltage, Us	9 … 36 Vdc (Ripple ±10%)
Output voltage (max), Uout	39 Vdc (open drain)
Residual voltage (max), Ures	0.8 V (I = 250 mA)
Load current (max), Iout	250 mА
Current protection of the output, Iprot	NO
Current consumption (max), Is	7 mA
Switching frequency (max), fo	1200 Hz (Sn=1.2 mm)
Switching time, fall and rise, tf / tr	2 µs / 2 µs
Operating temperature range, Tamb	-25° … +70° C
Degree of protection	IP67 (IEC144)
Light output indicator	LED
Joining - cable “LIYY“	3x0.25 mm², L=2 m, PVC, grey
Overall dimensions	M8x1, L=30 mm
Housing material	PVC